User Manual

146
Characters,
Factory Default
Setting Item, Setting Range
Communication protocol
Shinko protocol
Modbus ASCII
Modbus RTU
Instrument number
Setting range: 0 to 95
Communication speed
9600 bps
19200 bps
38400 bps
Data bit/Parity
8 bits/No parity
7 bits/No parity
8 bits/Even
7 bits/Even
8 bits/Odd
7 bits/Odd
Stop bit
1 bit
2 bits
Response delay time
Setting range: 0 to 1000 ms
SVTC bias
Setting range: Converted value of 20% of the input span
DC voltage, current inputs: 20% of the scaling span (*1)
Remote/Local
Local
Remote
External setting input high limit
Setting range: External setting input low limit to Input range high limit (*1)
External setting input low limit
Setting range: Input range low limit to External setting input high limit (*1)
Remote bias
Setting range: Converted value of 20% of the input span
DC voltage, current inputs: 20% of the scaling span (*1)
(*1) The placement of the decimal point follows the selection.