User Manual

116
Simplified converter
function
If ‘Converter’ is selected in [Controller/Converter function], this
instrument can be used as a converter, by setting the following items.
Setting Item
Values or Selection
SV1
Scaling low limit value
SV2
(BCS2: EIW, EIT, EI options,
BCR2/BCD2: C5W, EIW, EIT, EI options)
Scaling low limit value
SV3 (EIW option)
(BCS2: EIW, EI options,
BCR2/BCD2: C5W, EIW, EIT, EI options)
Scaling low limit value
SV4 (EIW option)
(BCS2: EIW, EI options,
BCR2/BCD2: C5W, EIW, EIT, EI options)
Scaling low limit value
OUT1 proportional band
Input span
Integral time
0
Derivative time
0
Reset
0 (Reset value, calculated by
Auto-reset function)
OUT2 proportional band
Input span
EV1/EV2 alarm value 0
Enabled/Disabled
Disabled
EV1/EV2 alarm value
0 or Input range low limit value (Scaling
low limit value)
EV1/EV2 high limit alarm value
0 or Input range low limit value (Scaling
low limit value)
EV1/EV2 alarm hysteresis
1.0
EV1/EV2 alarm delay time
0
EV1/EV2 alarm Energized/
De-energized
Energized
Loop break alarm time
0
Loop break alarm span
0
Direct/Reverse control
Direct control
OUT/OFF key function
Control output OFF function
Event input DI1 allocation
(BCS2: EIW, EIT, EI options,
BCR2/BCD2: C5W, EIW, EIT, EI options)
000: No event
Event input DI2 allocation
(BCS2: EIW, EI option,
BCR2/BCD2: C5W, EIW, EIT, EI options)
000: No event
Event output EV1 allocation
000: No event
Event output EV2 allocation
(EV2 option)
000: No event
Remote/Local
(EIT option)
Local
Transmission output type
(EIT option)
PV transmission
Transmission output high limit
(EIT option)
1370
Transmission output low limit
(EIT option)
-200