User Manual

11
Action Indicators
No.
Name
Description
(4)
O1 (Green)
Lit when control output OUT1 is ON.
For direct current output type, flashes corresponding to the MV in 125 ms
cycles.
O2 (Yellow)
Lit when control output OUT2 (EV2, DS options) is ON.
For direct current output type (DA option), flashes corresponding to the MV
in 125 ms cycles.
EV1 (Red)
Lit when Event output 1 is ON.
EV2 (Red)
Lit when Event output 2 (EV2 option) is ON.
Unlit if (Heating/Cooling control relay contact output) is selected in
[Event output EV2 allocation].
AT (Yellow)
Flashes while AT, ‘AT on startup’ or Auto-reset is performing.
R/L (Yellow)
Lit during Remote action, selected in [Remote/Local] (EIT option).
T/R (Yellow)
Lit during Serial communication (C5W, C5 options) TX (transmitting) output.
MEMO (Yellow)
Lit when Set value memory number (Fixed value control) is indicated.
(For BCR2, BCD2)
STEP (Green)
Lit when a step number (Program control) is indicated. (For BCR2, BCD2)
Key
No.
Name
Description
(5)
UP key
Increases the numeric value.
By pressing this key for 1 second during Program control, the performing
step is interrupted, proceeding to the beginning of the next step. (Advance
function)
(6)
DOWN key
Decreases the numeric value.
(7)
MODE key
Switches a setting mode, and registers the set data.
By pressing this key for 3 seconds during RUN mode, the unit enters
Monitor mode.
(8)
OUT/OFF key
By pressing the key for approx. 1 second, one of the following items
selected in [OUT/OFF key function] is activated.
OUT/OFF Key Function
Description
Control output OFF function
Turns control output ON or OFF.
Auto/Manual control
Switches the Auto/Manual control.
Program control
Starts/Stops the Program control.
Console Connector
No.
Name
Description
(9)
Console
connector
By connecting the tool cable (CMD-001, sold separately), the following
operations can be conducted from an external computer using the Console
software SWC-BCx01M.
• Reading and setting of SV, PID and various set values
• Reading of PV and action status
• Function change