User Manual

104
9.6 Clearing Data
If data is cleared, data will revert to factory default values.
To clear data, press and hold , , , (in that order) together for approx. 3 seconds in the PV/SV
Display.
The unit enters [Data clear Yes/No] mode.
Select ‘Yes’, and press the key. Data will be cleared.
While data is clearing, is indicated in the PV Display.
Executing data clear
Power ON
RUN mode
PV/SV Display
+ + + (3 sec)
Data clear Start/Stop
or
Select (Yes).
Data is clearing.
After data is cleared, the unit automatically reverts to the PV/SV Display.
RUN mode
PV/SV Display