User Manual

3
3.2 External dimensions (Scale: mm)
(Fig. 3.2-1)
3.3 Panel cutout (Scale: mm)
Lateral close mounting
n: Number of units mounted
(Fig. 3.3-1)
3.4 Mounting and removal to/from the control panel
How to mount the BCS1
Mount the controller vertically to a flat, rigid panel.
Mountable panel thickness: 1 to 5mm
(1) Insert the controller from the front side of the panel. (Fig. 3.4-1)
(2) Insert the mounting frame until it comes into contact with the panel. (Fig. 3.4-2)
How to remove the mounting frame and unit (Fig. 3.4-3)
(1) Turn the power to the unit OFF, and disconnect all wires before removing the mounting frame.
(2) Insert a flat blade screwdriver between the mounting frame and unit
1
.
(3) Slowly push the frame upward using the screwdriver
2
, while pushing the unit toward the panel
3
.
(4) Repeat step (2) and slowly push the frame downward using the screwdriver for the other side.
The frame can be removed little by little by repeating these steps.
(Fig. 3.4-1) Mounting (Fig. 3.4-2) Mounting (Fig. 3.4-3) Removal
75
45
+0.5
0
45
+0.5
0
45
+0.5
0
n x 48-3
+0.5
0
Mounting frame
M3 screw
48 8 60
48
44.5
59.2
Mounting frame