User Manual

ManualsBrandsShinko ManualsAutomationUniversal Controller BCS1 100...240 VAC

INSTRUCTION MANUAL

Digital Temperature Indicating Controller BCS1

No.BCS11JE2 2011.11

Thank you for purchasing our Digital temperature indicating controller BCS1.

This manual contains instructions for the mounting, functions, operations and notes when operating the BCS1.

To prevent accidents arising from the misuse of this controller, please ensure the operator receives this manual.

Safety precautions (Be sure to read these precautions before using our products.)

The safety precautions are classified into categories: “Warning” and “Caution”.

Warning: Procedures which may lead to dangerous conditions and cause death or serious injury, if not

carried out properly.

Caution: Procedures which may lead to dangerous conditions and cause superficial to medium injury or

physical damage or may degrade or damage the product, if not carried out properly.

Warning

• To prevent an electric shock or fire, only Shinko or other qualified service personnel may handle the inner assembly.

• To prevent an electric shock, fire or damage to the instrument, parts replacement may only be undertaken

by Shinko or other qualified service personnel.

Safety precautions

• To ensure safe and correct use, thoroughly read and understand this manual before using this instrument.

• This instrument is intended to be used for industrial machinery, machine tools and measuring equipment. Verify

correct usage after consulting the purpose of use with our agency or main office. (Never use this instrument for

medical purposes with which human lives are involved.)

• External protection devices such as protection equipment against excessive temperature rise, etc. must be

installed, as malfunction of this product could result in serious damage to the system or injury to personnel. Also

proper periodic maintenance is required.

• This instrument must be used under the conditions and environment described in this manual. Shinko Technos

Co., Ltd. does not accept liability for any injury, loss of life or damage occurring due to the instrument being

used under conditions not otherwise stated in this manual.

Caution with respect to Export Trade Control Ordinance

To avoid this instrument from being used as a component in, or as being utilized in the manufacture of weapons of

mass destruction (i.e. military applications, military equipment, etc.), please investigate the end users and the final

use of this instrument. In the case of resale, ensure that this instrument is not illegally exported.

1. Model

1.1 Model

1.2 How to read the model label

Model labels are attached to the right side of the case (Fig. 1.2-1) and at the bottom of the inner

assembly (Fig. 1.2-2).

(e.g.) Control output (OUT) : Relay contact output

Supply voltage : 100 to 240V AC

Input : Multi-range input

Event output : 2 Event outputs (Option)

(Fig. 1.2-1) (Fig. 1.2-2)

BCS1 R - 0 0 M00 - 0 000000000-00

Series BCS1 BCS1

Relay contact RControl output

(OUT)

Non-contact voltage S

Supply voltage 100-240V AC 0

Input Multi-range input M00

No Event output 0Event output

(Option)

2 Event outputs 2

和文は裏面をご覧下さい。

SD 1743

Summary of content (8 pages)

PAGE 1
SD 1743 和文は裏面をご覧下さい。 INSTRUCTION MANUAL BCS1 Digital Temperature Indicating Controller No.BCS11JE2 2011.11 Thank you for purchasing our Digital temperature indicating controller BCS1. This manual contains instructions for the mounting, functions, operations and notes when operating the BCS1. To prevent accidents arising from the misuse of this controller, please ensure the operator receives this manual. Safety precautions (Be sure to read these precautions before using our products.
PAGE 2
. Name and functions of sections PV display Action indicators SV display Mode Key Increase Key Decrease Key (Fig. 2-1) [Displays, Indicators] PV display (Red) : Indicates the PV (process variable) or setting characters in any setting mode. SV display (Green) Indicates the SV (desired value), output MV (manipulated variable) or each set value in any setting mode. OUT indicator (Green): Lights when control output (OUT) is ON. EV1 indicator (Red) : Lights when Alarm 1 (A1) output (option) is ON.
PAGE 3
.2 External dimensions (Scale: mm) Mounting frame 48 44.5 59.2 M3 screw 48 8 60 (Fig. 3.2-1) n x 48-3 +0.5 0 45 +0.5 0 75 45 +0.5 0 3.3 Panel cutout (Scale: mm) Lateral close mounting n: Number of units mounted 45 +0.5 0 (Fig. 3.3-1) 3.4 Mounting and removal to/from the control panel How to mount the BCS1 Mount the controller vertically to a flat, rigid panel. Mountable panel thickness: 1 to 5mm (1) Insert the controller from the front side of the panel. (Fig. 3.
PAGE 4
. Wiring Warning Turn the power supply to the instrument off before wiring or checking. Working on or touching the terminal with the power switched on may result in severe injury or death due to Electric Shock. Caution • The terminal block of this instrument is designed to be wired from the left side. The lead wire must be inserted from the left side of the terminal, and fastened with the terminal screw. The torque should be 0.63N•m.
PAGE 5
. Operation flowchart POWER ON PV/SV display mode [Main setting mode] SV (desired value) SV low limit to SV high limit [Alarm 1 (A1), 2 (A2) value Setting Range] High limit alarm: -(Input span) to input span Low limit alarm: -(Input span) to input span High/Low limits alarm: 0 to input span High/Low limit range alarm: 0 to input span Process high alarm: Input range low limit to input range high limit Process low alarm: Input range low limit to input range high limit High limit alarm with standby: -(Inpu
PAGE 6
Characters used in this manual: Indication Number, / -1 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Indication Alphabet Indication Alphabet Indication after power-on After the power is turned on, the PV display indicates the input type characters and temperature unit, and the SV display indicates the input range high limit value for approximately 3 seconds. See (Table 5-1).
PAGE 7
6. Unit operation After the unit is mounted to the control panel and wiring is completed, operate the unit following the procedures below. (1) Turn the power supply to the BCS1 ON. (2) Input each set value. Refer to “5. Operation flowchart”. (3) Turn the load circuit power ON. Control action starts so as to keep the control target at the SV (desired value). 7. Basic settings Basic setting method for the Main setting mode and Auto-tuning Perform/Cancel will be described.
PAGE 8
. Specifications Supply voltage 100 to 240V AC 50/60Hz Allowable voltage 85 to 264V AC fluctuation Accuracy Thermocouple : Within 0.3% of each input span 1digit, (Setting, Indication) Less than 0 (32 ): Within 0.4% of each input span 1digit RTD : Within 0.2% of input span 1digit Input sampling 0.5 sec period Control output Relay contact: 1a Control capacity: 3A 250V AC (resistive load) (OUT) 1A 250V AC (inductive load cos =0.