Datasheet

■ Standard specifications
Input
Thermocouple : K, J, External resistance: 100 or less
RTD : Pt100 3-wire system, Allowable input lead wire resistance: 10 or less per wire
Rated scale : Refer to the Rated scale
Accuracy
(Setting, Indication)
Thermocouple : Within 0.3% of each input span 1digit,
However, less than 0 (32 ): Within 0.4% of each input span 1 digit
RTD : Within 0.2% of each input span 1digit
Control action
• PID (with auto-tuning function)
• PI action: When derivative time is set to 0.
• PD action (with auto-reset function): When integral time is set to 0.
• P action (with auto-reset function): When both derivative and integral time are set to 0.
• ON/OFF action: When proportional band is set to 0.
OUT proportional band(P) : 0 to1000 or 2000 (Default value: 10 ) (ON/OFF action when set to 0)
With decimal point: 0.0 to 999.9 or 0.0 to 999.9 (ON/OFF action when set to 0.0)
Integral time(I) : 0 to1000sec (OFF when set to 0) (Default value: 200sec)
Derivative time(D) : 0 to 300sec (OFF when set to 0) (Default value: 50sec)
OUT proportional cycle : 1 to 120sec (Default value: Relay contact: 30sec, Non-contact voltage: 3sec)
ARW : 0 to 100% (Default value: 50%)
ON/OFF hysteresis : 0.1 to 100.0 ( ) (Default value: 1.0 )
Output high limit, low limit : 0 to 100% (Not available for ON/OFF action)
(Default value: Output low limit: 0%, Output high limit: 100%)
Control output
Relay contact: 1a Control capacity: 3A 250V AC (Resistive load), 1A 250V AC (Inductive load cos =0.4)
Electric life: 100,000 cycles
Non-contact voltage (for SSR drive): 10
+3
0
V DC, Max. 20mA DC
Input sampling
period
0.5sec
Insulation
resistance
10M or more, at 500V DC
Supply voltage
100 to 240V AC, 50/60Hz Dielectric strength
1.5kV AC for 1 minute
Between input terminal and power terminal
Between output terminal and power terminal
Allowable voltage
fluctuation range
85 to 264V AC Case, Front panel Flame-resistant resin (Color: black), Membrane sheet
Power consumption
Approx. 7VA Mounting Flush
Ambient temperature
0 to 50 External dimensions
48X48X68mm (WxHxD)
(Depth of control panel interior: 60mm)
Ambient humidity
35 to 85%RH (Non-condensing) Weight Approx. 120g
Attached functions
Sensor correction, Set value lock, Power failure countermeasure, Self diagnosis, Automatic cold junction temperature
compensation, Burnout (Overscale), Indication range, Control range, Warm-up indication
Option
2 Event outputs (A1, A2)
Accessories
included
Mounting frame 1 piece, Instruction manual 1 copy
Accessories sold
separately
Terminal cover
■ External dimensions (Scale: mm) ■ Panel cutout (Scale: mm)
75
45
＋0.5
0
45
＋0.5
0
45
＋0.5
0
n×48-3
＋0.5
0
Lateral close mounting
n: Number of units mounted
Mounting frame
60
8
44.5
59.2
48
48
Ma
r
20
11
BCS1E3