User’s Manual Product Name: __SHINEX SCDK______ Model Name: DCPC02 Please refer the following information for setting up. Product Spec.
Control, Operation, Settings 1) Login settings 2) Individual control 3) Collective starting/stopping and settings for control group 4) Schedule control 5) Interlocking control 6) Emergency stop control for fires 7) Power failure and recovery processing control 8) Centralized control of air conditioners RS485 Micro SD Type C USB 1 USB 2 D DG DDG 1 1 N2 2 N Parameter Description USB2 USB_ACDK USB1 USB_ACDK Micro SD LAN Micro SD Solt Network RS485 RS485 D1+、D1-、D2+、D2- Type C Power In 5V3A CP
Storage Emmc 16GB eMMC 5VDC power input, +-5% tolerance Input Power Range Type C Use USB type C as power connector on rear I/O M/B Form Factor Other Components PCB dimension 168 x 82mm Battery Interface CR2032 coin cell,by on board socket 1 GbE speed LAN on rear I/O,by AR8033 Ethernet transceiver. LAN CPU has Iimitation note on full speed throughput USB 2.0 2 x USB 2.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
