Instruction Manual

6
Product Description
Using the illustration as a guide, famil-
iarize yourself with your machine and its
various components. Understanding your
machine helps ensure top performance,
long service life and safer operation.
WARNING!
Do not make unauthorized
modications or alterations to any of
these units or their components.
IMPORTANT!
The terms “left”, “left-hand”, and
“LH”; “right”, “right-hand”, and “RH”;
“front” and “rear” refer to directions as
viewed by the operator during normal
operation.
Outer Tube
Trimmer Head
Grip
Cutting
Attachment Shield
Gearcase
Handle
Throttle
Trigger
Ignition
Switch
Fuel
Tank
Specications
Model T282
Engine Type Air cooled, two stroke, single cylinder gasoline engine
Dry Weight (Without guard and strap) 6.6 kg / 14.7 lb
Dimensions 1775 x 314 x 345 mm / 69.9 x 12.4 x 13.6 in.
Bore x Stroke 1.38 x 1.18 in./ 35 x 30 mm
Displacement 28.9 cc/1.7 cu. in.
Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Fuel Tank Capacity
750 ml/25.4 oz..
Carburetor Type Diaphragm-type carburetor
Ignition One-piece electronic, transistor-controlled
Spark Plug BPMR6A
Spark Plug Gap 0.6 mm (0.024 in)
Torque 16.7 - 18.6 N∙m (148-165 in • lbf)
Air Cleaner Type Non-reversible foam lter element
Starting Method Recoil
Stopping Method Slide switch
Transmission Type Automatic, centrifugal clutch w/bevel gear
Engine Idle Speed 3,000 RPM
Clutch Engagement Speed 3,800 RPM
Wide Open Throttle Speed (W.O.T.) 9,600 RPM
*Specications are subject to change without notice.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (engine modication) and, if the second to last character of the En-
gine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system
is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions).
Evaporative emissions for California models are only applicable to fuel tanks.