Instruction Manual

17
Mufer and spark arrester maintenance
Cooling System
Engine Cover
Screws
Mufer Cover
Engine Cover
Mufer
Cover
Screw
Spark Arrester
Screen
Spark Arrester
Cover
Outlet
Screws
Mufer Gasket
Mufer
Gasket
Mufer
Screws
Mufer and spark arrester maintenance
IMPORTANT!
If you note excessive carbon buildup, consult with an authorized Shindaiwa servicing dealer.
If the engine becomes sluggish and low on power, check and clean the spark arrester screen.
1. Remove the spark plug boot.
2. Remove the engine cover and mufer cover.
3. Remove the spark arrester screen and cover.
4. Clean the screen with a stiff bristle brush.
5. Remove the mufer.
6. Inspect the cylinder exhaust port for any carbon buildup.
7. Gently tap the mufer on a wood surface to dislodge any loose carbon.
8. Reassemble the spark arrester, mufer and engine cover in the reverse order of disassembly.
WARNING!
Never operate the unit with a damage or missing mufer or spark arrester! Operating with a missing or damaged spark
arrester is a re hazard and could also damage your hearing.