Operator`s manual

6
Product Description
Using the illustration as a guide,
familiarize yourself with the unit
and its various components.
Understanding your machine
helps ensure top performance,
longer service life, and safer
operation.
Support Handle
for Left Hand
Outer
Tube
Hedge Trimmer Cutter
Assembly
Cutter
Assembly
Adjustment
Lever
Cutter Blade Cover
Fuel
Tank
Guard
Handle
guard
Air Filter
Assembly
Powerhead Assembly
Spark Plug
Fuel
Tank
Stop
Switch
Fuel Tank
Guard
Throttle Trigger
Specications
Specications are subject to change without notice.
WARNING!
Do not alter this machine
or any of its components!
Model AH242
Engine type 2-stroke, single cylinder, air cooled, gasoline engine
Dimensions (L x W x H) 2387 x 248 x 245 mm (94 x 9.76 x 9.65 in.)
Weight 6.18 Kg (13.6 lb.)
Bore x stroke 33 x 28 mm (1.3 x 1.1 in.)
Displacement 23.9 cm
3
(1.46 cu. in.)
Fuel/oil ratio 50:1 Shindaiwa Red Armor® ISO-L-EGD (ISO/CD 13738) and J.A.S.O.
M345- FD, two-stroke, air-cooled engine oil.
Carburetor type Diaphragm-type
Fuel tank capacity .69 L (23.3 . oz.)
Ignition Electronic
Spark plug NGK BPM8Y
Electrode Gap 0.6 mm (0.024 in.)
Torque 150 - 170 kgf cm (130 - 150 in • lbf)
Air cleaner type Double layer felt
Starting method Recoil
Stopping method Slide switch
Transmission type Centrifugal clutch
Blade Length 568 mm (22.4 in.)
Gear Lubricant Lithium Based Grease
Idle Speed 3,000 RPM
Clutch Engagement Speed 4,000 RPM
Wide Open Throttle Speed (W.O.T.) 11,800 RPM
Gearcase
Hedge Trimmer
Cutter Assembly
Cutter Bar and
Cutter Blades
Latch Release
Latch Lock
Throttle Handle
for Right Hand