User's Manual

Table Of Contents

Q3. Mobile Device automatically turns OFF.

Make sure that you never run out of power. As soon as you see the dialog box

informing you that “the main battery power is very low” you must charge the

battery immediately. Continued use of the Mobile Device even after being informed

of the battery power level can cause battery failure.

To conserve Battery Power consumption, switching the Mobile Device state to

suspend after a specified period of time is advisable. This can be configured in the

Power Properties window Schemes tab. Specify the length of idle time before the

Mobile device switches to the state of suspend. See section about Manage Battery

Life.

Q4. The Mobile Device would not Turn-ON.

When the Mobile Devices’ battery power is fully drained, the device will not power

ON. Connect the Mobile Device to an External Power source to charge the battery.

If in case the Mobile Device could still not be powered ON after recharging the

battery, try performing a hard reset.

For more information about Hard Reset, .see “VII-2 – Initialize to factory default”

section of this manual.

Q5. Touchscreen - Stylus action does not result to the

desired action.

You may need to recalibrate the touchscreen using the Screen Properties window

Align Screen function.

For more information, .see “IV – Terminal Settings, how to optimize” section of this

manual.

Troubleshooting

VII-1