User's Manual

Table Of Contents

The following are the common problems encountered while using the

Mobile Device.

▶ Troubleshooting

Included in this chapter are solutions to the common problem listed herein.

▷ Problem Analysis and Solution

Q1. The device would not turn ON even when connected

to external power source.

First, make sure that the external power source has the correct voltage. If it does

have the correct voltage, make sure that the battery power is not fully drained.

Fully drained batteries can cause power, even from external sources, to be temporarily

interrupted. (Prevent batteries from being fully drained by regularly charging it.)

Q2. Battery Power consumption is too fast.

Turning OFF the backlight when the Mobile Device is not being used (no touch

screen action, tap and scroll, is made) after a specified period of time saves battery

life. See section about Manage Battery Life.

Another way to conserve battery power is by dimming down the backlight. This

could be set in the Brightness window by sliding the horizontal scroll bar towards

the left. See section about Brightness.

For the Battery Power Scheme, switching the Mobile Device state to suspend after a

specified period of time really saves the battery power. This can be configured in

the Power Properties window Schemes tab. Specify the length of idle time before

the Mobile device switches to the state of suspend. See section about Manage

Battery Life.

Troubleshooting

VII-1