User's Manual

Table Of Contents

▶ Accept a Bluetooth partnership

If the wireless carrier enables Bluetooth on your device, you can establish a

Bluetooth partnership with other Bluetooth-enabled devices.

1. Make sure both Bluetooth devices are set to Visible and are within

range.

2. When you are prompted to accept a Bluetooth partnership with another

device, tap Yes.

3. When you are prompted, enter a passcode (a numbers-only password) if

you want to use one, and then tap Next. Using a passcode helps

improve security. If a passcode is required on the device requesting the

partnership, you must both use the same passcode.

4. Enter a display name to identify the partner device, and then tap Finish.

▶ Delete a Bluetooth partnership

You can delete a Bluetooth partnership that you previously established with

another Bluetooth-enabled device.

1. Tap Start > Settings > Bluetooth.

2. Tap the Devices tab.

3. Tap and hold the device partnership until you see a menu, and then tap

Delete.

4. Tap Yes to confirm.

Bluetooth

Ⅳ-5