User's Manual

Table Of Contents

▶ Set up a Bluetooth partnership

If the wireless carrier enables Bluetooth on your device, you can establish a

Bluetooth partnership with other Bluetooth-enabled devices.

After you have created a Bluetooth partnership, the two devices will

automatically reconnect when in range unless you turn off Bluetooth, move

your device out of range, or delete the partnership.

1. Make sure both Bluetooth devices are set to Visible and are within

range.

2. Tap Start > Settings > Bluetooth.

3. Tap the Devices tab.

4. Tap Add new device. Your device searches for other Bluetooth-enabled

devices and displays them in a list.

5. Scroll to the device that you want to add and tap Next.

6. Enter a passcode if you want one and tap Next. A passcode is a

numbers-only password that helps to increase security. The same

passcode must be entered on the device accepting the partnership.

7. Enter the display name that you want, and then tap Finish.

Bluetooth

Ⅳ-5