User's Manual
Table Of Contents
- STM-8800 User Manual v1.0 (Eng)_SHC_rev.01
- 슬라이드 번호 1
- 슬라이드 번호 2
- 슬라이드 번호 3
- 슬라이드 번호 4
- 슬라이드 번호 5
- 슬라이드 번호 6
- 슬라이드 번호 7
- 슬라이드 번호 8
- 슬라이드 번호 9
- 슬라이드 번호 10
- 슬라이드 번호 11
- 슬라이드 번호 12
- 슬라이드 번호 13
- 슬라이드 번호 14
- 슬라이드 번호 15
- 슬라이드 번호 16
- 슬라이드 번호 17
- 슬라이드 번호 18
- 슬라이드 번호 19
- 슬라이드 번호 20
- 슬라이드 번호 21
- 슬라이드 번호 22
- 슬라이드 번호 23
- 슬라이드 번호 24
- 슬라이드 번호 25
- 슬라이드 번호 26
- 슬라이드 번호 27
- 슬라이드 번호 28
- 슬라이드 번호 29
- 슬라이드 번호 30
- 슬라이드 번호 31
- 슬라이드 번호 32
- 슬라이드 번호 33
- 슬라이드 번호 34
- 슬라이드 번호 35
- 슬라이드 번호 36
- 슬라이드 번호 37
- 슬라이드 번호 38
- 슬라이드 번호 39
- 슬라이드 번호 40
- 슬라이드 번호 41
- 슬라이드 번호 42
- 슬라이드 번호 43
- 슬라이드 번호 44
- 슬라이드 번호 45
- 슬라이드 번호 46
- 슬라이드 번호 47
- 슬라이드 번호 48
- 슬라이드 번호 49
- 슬라이드 번호 50
- 슬라이드 번호 51
- 슬라이드 번호 52
- 슬라이드 번호 53
- 슬라이드 번호 54
- 슬라이드 번호 55
- 슬라이드 번호 56
- 슬라이드 번호 57
- 슬라이드 번호 58
- 슬라이드 번호 59
- 슬라이드 번호 60
- 슬라이드 번호 61
- 슬라이드 번호 62
- 슬라이드 번호 63
- 슬라이드 번호 64
- 슬라이드 번호 65
- 슬라이드 번호 66
- 슬라이드 번호 67
- 슬라이드 번호 68
- 슬라이드 번호 69
- 슬라이드 번호 70
- 슬라이드 번호 71
- 슬라이드 번호 72
- 슬라이드 번호 73
- 슬라이드 번호 74
- 슬라이드 번호 75
- FCC warning-15c
STM-8800 User Manual 2009 Copyright © Shinheung Precision Co., Ltd
If the screen do not respond to touches made on it or the touches are off-
point, the touch screen is needed to be calibrated to set the touch points
properly.
1. Tap Start > Settings > System > Screen.
2. Set/configure the touch points in the General Tab.
3. Tap on the Align Screen button to start calibrating the touch points.
4. Using the stylus pen, tap the target ( ) firmly and accurately at each
location on the screen. The target will continue to move until the screen
is aligned.
When the target disappears, tap the screen once to complete
the calibration process.
5. When you are done, tap on the OK button to accept/save the changes
made on the window.
Screen
Ⅳ-4
36