STM-7700™ Windows Mobile USER MANUAL STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
- Table of Contents - Copyright ------------------------------------------------------------------------------------------------------------------------------------------------------ 4 Proper Handling of the device -------------------------------------------------------------------------------------------------------------------------- 5 Ⅰ. Before Using the device ----------------------------------------------------------------------------------------------------------------------------- 7 1.
- Table of Contents - Ⅴ. PC connection -------------------------------------------------------------------------------------------------------------------------------- ----- 44 1. Microsoft ActiveSync installation -------------------------------------------------------------------------------------------------------- 45 2. Connect to a PC to install the program ------------------------------------------------------------------------------------------------ 47 Ⅵ.
Copyright This user’s manual and related products are under the protection of the copyright law, all rights reserved. This document and any part hereof may not be copied, adopted or translated into other languages without prior written consent of Shinheung Precision Co. Ltd. Shinheung Precision Co. Ltd., in reference to the instructions and/or information in this user’s manual in relation to the products referred to herein, does not provide nor implies the granting of an unlimited guarantee of any kind.
Proper Handling of the Device To insure the smooth and safe usage of this product, read carefully the instructions detailed in this manual. Using accessories other than those recommended and/or included in this product can cause accidents and product failures. Shinheung Precision Co. Ltd. Will not be responsible for such accidents and/or failures. Bringing this product to unauthorized repair or service centers/shops will void the warranty.
Proper Handling of the Device • Avoid eye contact with the Barcode scanner. It can cause eye damage. • Do not remove the battery while device is ON. • Use only the specified battery charger. Using other chargers can cause damage to the battery and/or be a fire hazard. • Do not make modifications to this product. This could cause fire, damage, electric shock, or serious injuries to users. • Do not use this product near gas and other flammable liquid. This could cause explosion.
Ⅰ Before using the device… STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅰ-1 Product Configuration 1) Basic product configuration STM-7700 Main device Battery & Cradle Power cord & Adapter 2) Additional Product Configuration Stylus Pen & Connection Wire USB Cable Printer Thermal Paper STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅰ-2 Specifications (Device) 1) Mobile Device Description STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅰ-2 Specifications (Cradle) 2) Cradle Device Description STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅰ-3 Charging the Battery 1) Charging the battery from the device Open the battery cover at the back of the device and place the battery into it. Place the device on the cradle and connect the power adapter with cord to the cradle to charge the battery. 2) Separately charging the battery To charge the battery separately from the device, place the battery on the bottom of the cradle. Caution : Risk of explosion if battery is replaced by an incorrect type.
Ⅰ-4 Replacing printer supplies – Thermal Paper 1) Open the printer cover by pressing down the printer cover lever that is found at the right side of the device. 2) Place the printer thermal roll paper into the printer as indicated by the picture instruction then close the printer cover. Use thermal roll papers that conforms to the prescribed dimensions (2”). STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅰ-5 Initialization 1) When the system does not response you may need to initialize the device by inserting the stylus into the reset hole found at the bottom of the device. 2) When initializing the device all files will be deleted/lost and all running programs will be terminated. Backup all important files with the use of Micro SD cards before initialization (reset). Reset Hole STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅱ Getting Started STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅱ-1 Power On • Insert the battery into the device, press and hold the PWR button until the device is powered ON. • When the device is powered ON, pressing the PWR button again turns OFF the device. If the device does not turn ON, check the battery for proper charging. Power [PWR] Button [Insert the battery] STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅱ-1 Power On ▶ Initial Setup or Reset The first time you power on your device or every system reset, it displays the Windows Mobile® screen which guides you through a series of startup procedures. 1. From the initial startup screen tap the screen using the stylus. 2. From the align screen, use your stylus to calibrate the touch accuracy of the screen by both accurately and firmly tapping the center of each target (crosshair). Repeat this process for every target that appears until completed.
Ⅱ-2 How to use the stylus pen This section describes the basic use of the stylus pen in running or moving programs on the touch screen. Only use stylus pen that comes with this product or recommended by Shinheung Precision. Other stylus pen can damage this product. Tap: Selects an item (program) to run by tapping the stylus pen over the item’s icon on the screen. Tap the icon to select Scroll: Moving the stylus pen scrolls the page.
Ⅱ-3 Screen description ▶ Status Icon The task bar that you normally find at the top of the screen is similar to that of the PC Windows. The icons displayed on the task bar indicates the status of the application and/or device it represents. Icon Icon Description Battery Charge Level – Shows your current battery charge level. (Icon shown is fully charged.) Low battery – Shows your current battery charge level is low.
Ⅱ-3 Screen description Icon Icon Description Bluetooth Visible – The Bluetooth technology is active and the device is visible. Bluetooth Connected – The Bluetooth technology is active and communicating (paired) with a target Bluetooth device. Wi-Fi Inactive – Wi-Fi Active – Your Wi-Fi connection is inactive. Your Wi-Fi connection is active and communicating. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅱ-4 Configuring the device ▶ Set the date and time Setting the date and time on your device makes sure that your calendar and alarm alerts will be accurate. 1. Tap Start, tap Settings (you may need to scroll the page), and then tap Clock & Alarms (you may need to scroll the page). 2. On the Time tab, select the correct time zone and set the date and time. Notes: During synchronization, the time on your device is updated with the time on your computer.
Ⅱ-4 Configuring the device ▶ Set up language and regional settings Regional settings specify the style in which numbers, currency, dates, and times are displayed. 1. Tap Start, tap Settings (you may need to scroll the page), tap System (you may need to scroll the page), and then tap Regional Settings (you may need to scroll the page). 2. On the Region tab, select your language and region.
Ⅱ-5 Locking and unlocking the device ▶ Locking Your Device 1. Tap Start, tap Lock (left softkey). ▶ Unlocking Your Device 1. Tap Unlock (left softkey). 2. Tap Unlock button. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅱ-6 Manage battery life ▶ Manage Battery Life No matter how big your device’s battery is, you’ll want to get the most from it. Get tips here. ▶ Make the battery last longer You can do several things to make the battery in your device last longer: 1. Adjust power-management settings to decrease screen brightness and also how long the backlight and screen displays stay on. 2.
Ⅱ-6 Manage battery life ▶ Change power-management settings You can use the Power screen to check the battery's remaining power and to adjust settings that extend battery life. For example, setting brief backlight and display time outs will extend battery life. 1. Tap Start > Settings > Power. 2. Tap the Advanced tab. 3. Select the check box for each condition where you want the device to turn off automatically. Then select the time interval.
Ⅲ Use File Explorer STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅲ-1 Run and use the File Explorer ▶ Explore files and folders You can browse the contents of folders on your device. The highest-level folder is named My Device and resembles the My Computer folder on a computer. The My Device folder contains the My Documents, Program Files, Temp, and Windows folders, among others. 1. Tap Start > File Explorer (you may need to scroll the page). 2. Tap the folder list (labeled My Documents by default) and tap the folder that you want to explore.
Ⅳ Terminal settings, how to optimize … STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅳ-1 Background Image ▶ Select a background image for the Today screen You can add a favorite picture or other image to your device and use it as a background image for your Today screen display. Be aware that background pictures can make it harder to read text on the Today screen. Note #1: When you use the camera to take a picture, you can tap Menu > Set as Today Background. When you do this, you can select the degree of transparency you want when the picture is used as a background image. 1.
Ⅳ-1 Background Image 3. In Folder, select the folder that contains the picture you want to use. 4. In Type, select the file type of the picture. 5. Tap the file name of the picture you want to use. 6. Tap OK. Note #2: To revert to the default background, tap Start > Settings > Today. Under Select a theme for your device, tap Windows Default. Clear the Use this picture as the background check box, and then tap OK.
Ⅳ-2 Brightness Adjust power-management settings to decrease screen brightness and also how long the backlight and screen displays stay on. 1. Tap Start > Settings > System > Backlight. 2. In the Battery Power and External Power Tabs, specify how long the backlight will stay on. Also specify if pressing a button or tapping the screen turns on the backlight. 3. In the Brightness Tab, set the brightness level of the backlight when “On Battery” and on external power source (“On Power”). 4.
Ⅳ-3 Volume and Sounds ▶ Set up sounds You can set up sounds on your device and associate them with events. These include incoming calls, reminders, new e-mail messages, new text messages, new voice messages, and warnings. Each event can have a distinctive sound to help you identify the event by its sound. 1. Tap Start, tap Settings, and then tap Sounds & Notifications. 2. On the Sounds tab, select the check box for each type of item for which you want to enable a sound. 3.
Ⅳ-3 Volume and Sounds ▶ Set up volume Tap the Speaker On icon ( adjust the volume level. ) to access the onscreen Volume slider and STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅳ-4 Screen If the screen do not respond to touches made on it or the touches are offpoint, the touch screen is needed to be calibrated to set the touch points properly. 1. Tap Start > Settings > System > Screen. 2. Set/configure the touch points in the General Tab. 3. Tap on the Align Screen button to start calibrating the touch points. 4. Using the stylus pen, tap the target ( ) firmly and accurately at each location on the screen. The target will continue to move until the screen is aligned.
Ⅳ-5 Bluetooth ▶ Bluetooth Connections You can connect your device to other Bluetooth-enabled accessories and devices, such as headsets, GPS devices, mobile phones, and computers. Bluetooth beams information, letting your device communicate with other devices. ▶ Turn Bluetooth on or off If the wireless carrier enables Bluetooth on your device, you can establish a Bluetooth partnership with other Bluetooth-enabled devices and access other Bluetooth services.
Ⅳ-5 Bluetooth 2. Tap the Mode tab. 3. Select or clear the Turn on Bluetooth check box. 4. Tap OK. Note #1: When you turn your device on, it can detect other devices that use Bluetooth, but other devices will be unable to detect your device unless you have set your device to be visible to other devices. Note #2: You can also turn Bluetooth on or off using Wireless Manager. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅳ-5 Bluetooth ▶ Make your device visible to other devices If Bluetooth is enabled on your device and you turn it on, you can detect and connect to other nearby Bluetooth-enabled devices and services. On your device, you must set Bluetooth to visible to enable other Bluetooth devices to detect it and to establish Bluetooth partnerships. For improved security, leave your device set to invisible unless you are establishing new partnerships, and turn off visibility after partnerships have been established. 1.
Ⅳ-5 Bluetooth ▶ Set up a Bluetooth accessory You can use Bluetooth-enabled accessories such as headsets, stereo headsets, car kits, and Global Positioning System (GPS) devices with your device by creating a Bluetooth partnership between your device and the Bluetooth accessory. 1. Turn on your device and the accessory and position them within several feet of one another. 2. Tap Start > Settings > Bluetooth. 3. Tap the Devices tab. 4. Tap Add new device.
Ⅳ-5 Bluetooth ▶ Set up a Bluetooth partnership If the wireless carrier enables Bluetooth on your device, you can establish a Bluetooth partnership with other Bluetooth-enabled devices. After you have created a Bluetooth partnership, the two devices will automatically reconnect when in range unless you turn off Bluetooth, move your device out of range, or delete the partnership. 1. Make sure both Bluetooth devices are set to Visible and are within range. 2. Tap Start > Settings > Bluetooth. 3.
Ⅳ-5 Bluetooth ▶ Accept a Bluetooth partnership If the wireless carrier enables Bluetooth on your device, you can establish a Bluetooth partnership with other Bluetooth-enabled devices. 1. Make sure both Bluetooth devices are set to Visible and are within range. 2. When you are prompted to accept a Bluetooth partnership with another device, tap Yes. 3. When you are prompted, enter a passcode (a numbers-only password) if you want to use one, and then tap Next. Using a passcode helps improve security.
Ⅳ-5 Bluetooth ▶ Rename a Bluetooth partnership If you have multiple Bluetooth partnerships on your device, you can give each partnership a unique name to identify it, such as My PC or Bob's Phone. 1. Tap Start > Settings > Bluetooth. 2. Scroll to the device that you want to rename, tap and hold the device name until you see a menu, and then tap Edit. 3. In the Display Name field, enter a new name for the device, and then tap Save. 4. Tap OK.
Ⅳ-6 Pictures and Video ▶ Pictures and Videos Let your device capture and display those vacation photos and video. This can be accomplish by tapping on Start, and then Pictures & Videos. ▶ Easily capture, find, view, and manage pictures and videos on your device 1. Activate the Camera Application Capture pictures and video with the camera application. This can be accomplish by tapping on Start, and then Camera. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅳ-6 Pictures and Video 2. View a photo a. The Pictures & Videos folder displays thumbnails of your saved photos. b. Tap the photo you want to view. The photo will become larger to fit the screen. 3. Play a video clip a. The Pictures & Videos folder displays thumbnails of your saved photos and videos. b. Tap the video you want to play. The video starts to play in the media player. c. To return to the Pictures & Videos folder, close the media player.
Ⅳ-6 Pictures and Video 4. View a slide show a. From Pictures & Videos folder, tap Menu > Play Slide Show. b. To end the slide show, tap the screen and then tap the close icon. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
V PC connection Using Microsoft ActiveSync, you can synchronize the information on your personal computer with information on your STM-8800. Synchronization compares the data on your PDA with your personal computer and updates both devices with the most recent information. To establish a partnership with a PC, you need to install Microsoft ActiveSync on your PC. You can download ActiveSync at www.microsoft.com/korea. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
V-1 Microsoft ActiveSync installation 1. Download and run the Active Sync installation program. Please click the [Next] button if you are ready to Set-up ActiveSync. 2. You’re prompted to select the installation folder for ActiveSync. Click the [Next] button to install ActiveSync to the default folder, or click the [Change] button to select a different destination for the program. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
V-1 3. Microsoft ActiveSync installation Click on the [Next] button. 4. ActiveSync installation is finished. Please turn on and put the STM-8800 unit on to the cradle with USB cable connected to the PC. (use USB 2.0 or higher) STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
V-2 Connect to a PC to install the program ▶ Using ActiveSync for program installation ▷ Using the Installation programs (Setup.exe or Install.exe) 1. Download the installation program to the PC or insert the installation CD in the PC’s CD drive. 2. Connect the Mobile Device to the PC via ActiveSync. 3. Locate for and double-click on the installation program (Setup.exe or Install.exe) on the PC. 4. Files will be automatically copied to the Mobile Device through ActiveSync. ▷ Using the *.cab files 1.
VI Appendix STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
VI-1 Troubleshooting The following are the common problems encountered while using the Mobile Device. ▶ Troubleshooting Included in this chapter are solutions to the common problem listed herein. ▷ Problem Analysis and Solution Q1. The device would not turn ON even when connected to external power source. First, make sure that the external power source has the correct voltage. If it does have the correct voltage, make sure that the battery power is not fully drained.
VI-1 Troubleshooting Q3. Mobile Device automatically turns OFF. Make sure that you never run out of power. As soon as you see the dialog box informing you that “the main battery power is very low” you must charge the battery immediately. Continued use of the Mobile Device even after being informed of the battery power level can cause battery failure. To conserve Battery Power consumption, switching the Mobile Device state to suspend after a specified period of time is advisable.
VI-1 Troubleshooting Q6. Cannot access the contents of the SD card inserted into the device. Make sure that the Micro SD card is inserted properly in the slot allotted for it. Using the File Explorer, see if a folder called “Storage Card” is present. Access the contents of the SD card from this folder. Q7. Data lost. If the Mobile Device’s Battery power runs out, all information may be lost except for those information, data and programs that are present when the Mobile Device was delivered.
VI-1 Troubleshooting ▷ Mobile Device – PC Connectivity and Synchronization Issues Solution to problems when connecting the Mobile Device to the PC through the cradle or otherwise. For an updated information on other issues, see the PC’s ActiveSync help or visit Microsoft’s website for mobile phones (www.microsoft.com/windows/embedded/ce.net). • • • • • • • Find out if you need to install the correct PC ActiveSync version. Make sure that the Mobile Device is turned ON.
VI-2 Initialize to factory default ▶ Initializing the Mobile Device back to the factory default settings (Hard Reset) There are many possible reasons why the Mobile Device has to be reinitialize back to the factory default setting, like, when the device would not respond even after performing a reset or the user forgets the password set on the system. This process is called “Hard Reset.” When performing hard reset, all information in the RAM (files, system settings, installed programs) will be cleared.
VI-3 Terminal maintenance ▶ Information on the Mobile Device Maintenance To be able to extend the life cycle of the Mobile Device, please consider the following advices: • Before cleaning the touchscreen, power off the Mobile Device. • Use small amount of glass cleaner on a soft cloth when cleaning the touchscreen. • Do not spray the glass cleaner directly on the touchscreen. • Use cotton swabs or soft cloths when cleaning the battery/charging terminals.
VI-4 Product specifications SECTION SPECIFICATION Processor Samsung S3C6410 800MHz OS Microsoft Windows Mobile 6.5/ CE.net 5.0 Memory 512MB NAND Flash MEMORY 256MB Mobile DDR SDRAM Display 240x320 3.5’ TFT-LCD with Touch Screen, 260k Color Communication WLAN (802.11a/b/g) GPRS , WCDMA S-GPS(SiRF Ⅲ) Bluetooth 2.
VI-5 Others ※ Certification Information 1. 2. 3. 4. 5. Name of Device: Wireless Data Device Model:STM-7700 Certification Information: KCC, FCC, CE, CCC Certifications Certified for: Shinheung Precision Co., Ltd. Manufacturer (Country of Origin): Shinheung Precision Co., Ltd. (Korea) Instructions to users The Mobile Device has been certified to emit acceptable amount of electromagnetic wave.
VI-6 Note FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i n a residential installation. This equipment generates, uses and can radiate radio frequen cy energy and, if not installed and used in accordance with the instructions, may cause h armful interference to radio communications.
Ⅶ Device Test STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-1 MSR 1. Development Environment DLL for STM-7700 Magnetic Strip Reader (MSR) is available. To incorporate MSR in the application, use keyboard emulation feature of the STM-7700 MSR module. 2. Installing STM-7700 MSR Utility Copy MSR Utility.cab to the device Run MSR Utility.cab from the device 3. How to setup STM-7700 MSR Keyboard Emulation Feature 1) Access MSR Utility: ① Installing the MSR Utility.cab places the MSR_Setting.exe in the device’s [Windows] folder. Use File Explorer to access it.
Ⅶ-1 MSR ③ Locate for and tap [File Explorer] icon. ④ Go to the [Windows] folder. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-1 MSR ⑤ Locate for and tap [MSR_Setting] application. 2) The MSR Setting Windows ① In the [MSR Setting] window, place a check mark on the [Use Keystroke] field. ② Tap on the [Apply] button to save the setting. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-1 MSR 4. Other MSR Setting Options 1) Sentinel – Set the character identifying each MSR track and end. 2) Prefix / Suffix – Set the characters at the start (prefix) and end (suffix) of each track. 3) End character (Carriage Return / Line Feed) – Set the last End character to either a carriage return or a line feed. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-2 IC Card 1. Installing STM-7700 IC-Card Test Utility 1) Copy ICCARDTestCOM9.exe and mfcce400.dll to the device 2) Run ICCARDTestCOM9.exe from the device STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-2 IC Card 1. How to perform test on the STM-7700 IC-Card reader. 1) Insert IC-Cards (SIM/SAM) on to the various slots available: ① IC Card slot is located between the LCD display and MSR slot. Inset IC Card with contact points facing you. ② Four (4) additional SAM card slots are available inside the battery bay. Insert IC (SAM) Cards with contact points facing upward. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-2 IC Card 1) The IC Card Test application: ① In the [IC Card Test] window, tap [Com Open] button. ② Tap appropriate button (IC/SAM1/SAM2/SAM3/SAM4 Activation) to test each cards that are inserted in the appropriate slots. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-2 IC Card ③ Tap corresponding [<--Deactivation] button to deactivate card slot. ④ Tap [Com Close] button to close the COM port. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-3 PRINTER 1. How to Test STM-7700 Pinter 1) Access Printer Test Application ① Tap [Start] ② Locate for and tap [File Explorer] Icon STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-3 PRINTER ③ Locate for and tap [PRN_TEST] application. 2) The PRN_TEST window: ① In the [PRN_TEST] window, tap on the [TEST] button. ② Printer will start printing test. Wait for it to finish and check out any error messages that will appear on the screen. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-3 PRINTER 2. Other Printer Test Options 1) Update Firmware – Use this button to load printer firmware one to the device ① Tap on the [Update Firmware] button ② Locate for and select the firmware file you wanted to load by tapping on the file name ③ Wait for the firmware to finish loading STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-3 PRINTER 2) Check Printer Information - Printout printer information ① Tap on the [Check Printer Information] button ② Printer information will be printed out. Make sure that the printer has a paper. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS 1. Make sure that the SIM card is inserted into the device. 2. Power ON the device. 3. Configure the APN address - In Windows Mobile 6, the "Extra dial-string modem commands" box has been removed, making it difficult to add a modem string to send to the GPRS module. We could, however, configure this using two (2) methods: 1) METHOD #1 – The following work-around involves editing the registry on your device, and you do so at your own risk! ① Install a registry editor.
Ⅶ-4 GPRS ⑤ Press OK to close the dialog ⑥ Click on the green star in the menu to save the setting ⑦ Reset your Windows Mobile. (Source: http://www.filesaveas.com/gprsconnect.html) 2) METHOD #2 - You could use a terminal emulation program to enter the APN information. The procedure below uses MODEM_TEST application. ① Copy the Modem_Test.exe application to the device ② Run the Modem_Test.exe program STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS ③ Click on the [Power On] button. ④ Select COM1 and click [Open] button. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS ⑤ AT Command sequence using the MODEM_TEST.exe program. √ On the field reserved for AT commands, perform the following: - Type AT - Press [Send] button and wait until the “OK” message displays - Type AT+cgdcont=1,”IP”, ”< apn.address >” NOTE : Make sure that “IP” is in uppercase and “” is the APN address information provided by the telecommunication service provider.
Ⅶ-4 GPRS 4. Make new Connection 1) Tap [Start] > [Setting] > [Connections] > [Connections] 2) The Connection Settings window should appear. Tap [Add a new modem connection]. 3) Enter a name for the connection. Select the [Hayes Compatible on COM1:] modem. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS 4) Enter the number exactly as it should be dialed (see screen shot below). 5) Enter the username and password provided by the telecommunication service provider. Then tap on the [finish] button to complete the new modem connection configuration. 6) The Connection Settings window should appear. Tap [Manage existing connections]. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS 4) Enter the number exactly as it should be dialed (see screen shot below). 5) Enter the username and password provided by the telecommunication service provider. Then tap on the [finish] button to complete the new modem connection configuration. 6) The Connection Settings window should appear. Tap [Manage existing connections]. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-4 GPRS 7) Tap and hold on the desired connection to display connection options. 8) From the connection options menu, select [Connect]. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-5 GPS STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-6 BCR 1. Development Environment 1) To incorporate MSR in the application, use keyboard emulation feature of the STM-7700 BCR module. 2. How to setup STM-7700 BCR Keyboard Emulation Feature 1) Access Buttons Settings Utility: ① Tap [Start] - [Settings] - [Personal] - [Buttons]. ② Locate for and tap [S] button. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-6 BCR ③ Make sure to assign [BCR Trigger] to this button. 2) Tap [OK] 3. How to test STM-7700 BCR 1) After activating Keyboard Emulation feature, you can use any application that accepts keyboard input (like notepad) to test the BCR. STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-7 W-LAN Windows Mobile Device Wi-Fi Configuration http://technet.microsoft.com/en-us/library/dd361764.aspx 2/9/2009 Wi-Fi wirelessly connects a device to the Internet through access points that can be up to 30 meters away. Wireless access points may be provided by your service provider, your employer, coffee shops, airports, and other gathering places. Your device must wirelessly connect to these access points—or "hotspots"—before you can use your device to connect to the Internet.
Ⅶ-7 W-LAN # To enable or disable Wi-Fi 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Choose the Wi-Fi button. If it is turned off, the button will appear as a lighter color and display an icon marked with an "X". 3. Choose Done. # To set up a Wi-Fi connection 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Scroll to Wi-Fi and press ENTER. The device will detect available Wi-Fi networks. 3.
Ⅶ-7 W-LAN # To edit a Wi-Fi connection 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Choose Menu, and then choose Wi-Fi Settings. 3. Scroll to the connection that you want to edit, choose Menu, and then choose Edit. 4. Make changes as needed, and then choose Finish. # delete a Wi-Fi connection 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Choose Menu, and then choose Wi-Fi Settings. 3.
Ⅶ-7 W-LAN # To change Wi-Fi settings 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Choose Menu, choose Wi-Fi Settings, and then choose the Wireless tab. 3. Scroll to the connection that has the settings that you want to change, choose Menu, and then choose Edit. 4. Change any of the following information: - In Network name, enter a name for the connection. - In Connects to, select The Internet or Work.
Ⅶ-7 W-LAN # To change Wi-Fi settings 1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager. 2. Choose Menu, choose Wi-Fi Settings, and then choose the Wireless tab. 3. Scroll to the connection that has the settings that you want to change, choose Menu, and then choose Edit. 4. Change any of the following information: - In Network name, enter a name for the connection. - In Connects to, select The Internet or Work.
Ⅶ-7 # W-LAN To adjust Wi-Fi power mode settings 1. Choose Start, choose Settings, tap the Connections tab, and then choose Wireless LAN. 2. Choose the Power Mode tab. 3. On the Best Performance-Best Battery scale, do one of the following: - To conserve more battery power, drag the slider toward the Best Battery setting. Dragging the slider toward the Best Battery setting reduces signal performance. - To improve signal performance, drag the slider toward the Best Performance setting.
Ⅶ-8 CAMERA 1. Activating STM-7700 Camera 1) Tap [Start] and locate for the [Camera] icon. 2) Tap [Camera] icon STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-8 CAMERA 2. How to Capture iamge 1) Focus the image that you want to capture. 2) Use [ ] to adjust brightness 3) Use [ ] to zoom the image in or out. 4) Tap [ ] icon located at the bottom of the screen. 5) Select either to [SAVE] or [CANCEL]. 3. How to Change camera mode 1) Tap [ ] icon 2) Select between [SINGLESHOT] or [MULTISHOT] mode STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Ⅶ-8 CAMERA 4. How to Change camera image size 1) Tap [ ] or [ ] or [ ] or [ ] icon. 2) Select between [SINGLE SHOT] or [MULTI SHOT] mode STM-7700™ Windows Mobile USER MANUAL 2012 Copyright © Shinheung Precision Co.
Body-worn Operation This device was tested for typical body-worn operations with the back of the device kept 0 cm between the user’s body and the back of the device. To comply with FCC RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s body and the back of the device. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used.
