User's Manual
Table Of Contents
- STM-7100 User Manual_SHC_rev.01
- ActiveSync 28T------------------------------------------------------------------------------------------------------- 45
- Reset 28T-------------------------------------------------------------------------------------------------------------- 46
- Fundamental Problems 28T--------------------------------------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------------------------------- 49
- Usage and maintenance 28T------------------------------------------------------------------------------------- 49
- Device Handling 28T------------------------------------------------------------------------------------------------ 49
- Specification28T------------------------------------------------------------------------------------------------------ 50
- When you turn on the unit, basic screen will be displayed.
- Functions of Icons in the basic screen are explained as bellows.
- You need to install the ActiveSync program for connecting this unit to the Computers.
- Please refer the “Connect to the PC” pages for installation and how to use of ActiveSync.
- From the Start menu, run Internet Connector to connect with network through WLAN. Then you can use internet explorer to browse the internet.
- You can turn On/Off the WLAN
- 1) Backup/ Restore files with ActiveSync
- 2) Program installation with ActiveSync
- Memory
- You can use two kinds of memory for IMP-600(Built-in RAM and Micro SD Card).
- ActiveSync 28T------------------------------------------------------------ 45
- Reset 28T----------------------------------------- 46
- Fundamental Problems 28T-------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------ 49
- Usage and maintenance 28T------------------------------------------------------ 49
- Additional information
- FCC warning-15c
data will be saved.
Resetting
1. Remove Micro SD card if it is mounted
2. When the power is on, press the ‘RESET’ button with the stylus, then release
Notice
: Do not reset while you are wearing Ear micro phone, it may cause serious damage to your ear.
Information
: If the function cannot be restored even if the reset button is pressed, initialize your device.
Initializing (Hard Reset)
When you initialize your device, it returns to the status when it was purchased.
Notice
: When you initialize your device, all data stored in the memory is deleted. Your device’s initially installed
programs are not deleted. Before initialization, back up important data to your PC or Micro SD card
Initializing
1. Remove Micro SD card if it is mounted
2. Press RESET button while pressing and holding down-left button and ‘S’ button simultaneously.
3. When a screen appears, release RESET button and release others. Your device turns back to
- 46 -