User's Guide

OPERATOR’S Manual
15
CHAPTER 1
1.7. Adjustments and Settings
1.7.3 WiFi setting
1. Run a Smart WiFi Linke.
2. Set the network SSID and network key.
3. Select WiFI mode. Infra Mode and AP Mode can be selected.
1) Infra Mode - Check the Infra Mode item. If you turn off DHCP, You
can set the Address, Subnet Mask, Gateway Addres, and Local Port.
2) AP Mode-Check AP Mode and check Network SSID, Network Key,
IP Address, Subnet Mask, Gateway Address, Local Port, Channel,
Modify the Security Type.
4. After completion of setting, touch the Create button.
5. f the message “Tag on Gcube” appears in the middle of screen, then tag
a smart phone on Printer.
6. When the setting is well done, printer will print Self-Test Page after
reset.
➊
➌
➋
➍