User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
3-42
3.2.12 Network and Dial-up Connections
Table 3-33 Network and Dial-up Connections
ICON ITEM & FUNCTION
z “Connection” Tab: (Figure 3-66)
9 To create a “Dial-up Connection”:
¾
Double-tap the “Make New connection”.
¾
In the “Make New Connection” dialog box, enter a name
for the connection.(Figure 3-67)
¾
Select “Dial-Up Connection”.
¾
Select the “Next” button.
¾
Select the modem you want use.
¾
Select “Configure” (Figure 3-68)
¾
Under “Connection Reference”, use the default settings
provided. If you can’t connect using these settings, see
your ISP or network administrator for specific
information. If you want to always enter a phone number
before connecting, Select “Manual Dial”. Select “OK”.
¾ Select “TCP/IP Settings”.(Figure 3-72) in the “General”
tab. ensure “Use Server-assigned IP address” is
selected. In the “Name Servers” tab, ensure “Use
Server-assigned addresses” is selected, and select
“OK”. If you are unable to connect with these default
settings, see your ISP or network administrator for
specific TCP/IP information.
¾
Select the “Next” button and type the telephone number.
¾ Select the “Finish” button.
The connection you just created appears as an icon in the
“Network and Dial-up Connections” folder.
9 Set up a point-to-Point Protocol(PPP) account with an
ISP and obtain the following information:
¾
Access telephone number
¾
User name
¾ Password
Once you have established an account, create a new
connection on your device. When creating this connection, you
should be able to use all of the default TCP/IP settings provided