User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
3-23
3.2.3 Bluetooth Device Properties
Table 3-20 Bluetooth Device Properties
ICON ITEM & FUNCTION
z “BT Service” Tab: (Figure 3-25)
9 Tap the “Enable Bluetooth Device” to enable Bluetooth
device(Figure 3-26).
9 Wait for 20 seconds in order to initialize the Bluetooth
hardware correctly.
9 Click Scan Device Service” to pop “Bluetooth Manager”
window. Then tap the Scan Device button to initiate a scan
for Bluetooth hardware. The Bluetooth manager lists the
Bluetooth devices that it finds, see Figure 3-28. If
Bluetooth hardware is not found the Bluetooth Hardware
Error window appears, see Figure 3-29. Table 3-21
described the Bluetooth Icons.
9 Double tap the device to connect to on the device list. The
Bluetooth Manager Authentication window appears. Tap
No to connect to the device without authentication, or tap
Yes to authenticate the device before connecting. (Figure
3-30)
9 If the Yes button was selected in the Bluetooth Manager
Authentication window, the enter PIN windows appears.
Enter a PIN (between 1 and 16 characters) in the Enter
PIN: text box, and tap OK. The mobile computer sends the
PIN request to the device for bonding. (Figure 3-31)
9 When prompted, the same PIN must be entered on the
other device. When the PIN is entered correctly on the
other device, the bonded icon appears on the device list.
(Figure 3-32)
z “Serial Port” Tab: (Figure 3-33)
9 Tap the “Enable Bluetooth Device” to enable Bluetooth
device.
9 Wait for 20 seconds in order to initialize the Bluetooth
hardware correctly.
9 If want to use Virtual com, only SPP base profiles are
supported.(i.e. Printer, Modem, and LAP).Switch to “Serial