User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
3-3
Field Name Description
Select a method based upon the barcode scanning
application you will use.
Type Writing A unit continues a unit, fast showing
barcode number.
Copy & Paste Once show barcode number.
Keyboard
Message
Disable Not show the barcode number.
Prefix
Type the desired label prefix in this text box
Suffix
Type the desired label suffix in this text box
Default
Press “Default” button to reset all configuration setting of
“Basic” Tab into default values.
F/W ver.
Decoder firmware version.
Set All To
Default
Press “Set All To Default” button to reset all configuration
setting of “Basic” Tab, “Code Configure” Tab, “Code ID”
Tab and all barcode of “BarCode Setup” into default
values.
3.2.1.2 “Bar Code List” Tab:
Select the barcode symbologies you plan to scan from the list. Tap to
enable/disable the desired symbologies.
Figure 3-3 Bar Code List Tab