User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
2-31
Suspending:
The following conditions will suspend:
z Press <Power> key while the unit is on.
z
The duration timer of item “Switch state to Suspend” expires, which
indicates that there has been no use for a specified of time.
z
The battery pack is completely discharged.
z
Tap Start > Suspend
2.6.2 Resuming
Use one of following methods to resume (wake up the PDT):
z Press <Power> key to suspend or resume (wake up).
When a battery pack completely discharges while the unit is in suspend mode,
the PDT remains suspended until discharged battery condition is corrected.
2.7 Resetting the PDT
2.7.1 Software (Warm) Reset
A warm reset is a transition from the on, idle, or suspend power state that close
all applications, clears the working RAM, but preserves the file system.
Reason to Warm Reset: If an application “ hangs ”, initiate a warm reset to
terminate the application only.
Process to Warm Reset: To a warm reset, press “ Reset ” button.
Tap here to let PDT into
suspend mode