User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
2-30
3. Detach SD Holder and Insert the SD Card into the SD Slot.
Figure 2-26 Detach the SD Holder from PDT
2.5.10 Help
To tap “?” can get help information for each program.
2.6 Power management
2.6.1 Suspend Mode
The PDT will go into a suspend mode when it is idle for a period of time. The
idle duration can be customized using the Power control panel (refer to Figure
“Schemes Tab”) Suspend mode works and looks just like you have turned the
unit off. Press the key to suspend the PDT, Press the key again for
the PDT to resume its Previous state.
Use the Battery power control panel to set the duration to switch state to
Suspend mode when system using battery power. This will save battery power
when PDT is not in use.
Figure 2-27 Schemes Tab
1 2
3