User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
2-9
◆. When charging the battery pack, the charge LED indicator on the PDT
turns on Red. After the battery pack is fully charged, the charge LED
indicator turns to Green.
2.3.2 Charging the battery pack with Power Adapter
1. Connect the Power cord to the Power adapter.
2. Plug in the connector of the power adapter.
3. Connect the power cord to a power source.
Figure 2-11 Charging with power adapter
◆ When charging the battery pack, the charge LED indicator on the PDT
turns on Red.
◆ After the battery pack is fully charged, the charge LED indicator turns to
Green.
CAUTION: Please do not remove the Battery pack too long from PDT after
you have already full-charged the Battery pack and backup battery
pack and start to use the PDT. Otherwise non-saved data will be lost.
Please also keep in mind power the PDT off if you want to change the
main Battery pack.
PDT Main Unit
Charger LED
Indicator
Power Cord
Power
Adapter