User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
2-6
Table 2-2 Description of SC820 General View
“Red” color Reading barcode 1 Scanner LED
Indicator
“Green” color Successful reading
“Red” color Charging battery 2 Charge LED
Indicator
“Green” color Battery charged full
“Blue” color 2.4GHz Low Power Hyper or
WLAN Enable
3 3 color LED
Indicator
“Green” color GPRS Enable
4 LCM / Touch Panel Do specific action through touch panel by stylus
5 Left Scan key
Right Scan key
Scan key
Start scanning the barcode by pressing any one
of these three scan keys
6 Power key Puts the terminal into and wakes the terminal
from suspend mode.
7 F1 ~ F4 key The four application keys, hot keys of application
program defined by end user.
8 Navigation key Navigation keys for left, right, up and down
directions
9 Alpha keys Alpha key.
10 Numeric keys Numeric keys.
11 Fn key This key is used in combination with other keys to
type special characters and perform system
functions.
12 Enter key This key confirms data entry
13 Earphone Jack
Connector
A connector to plug a earphone
14 USB / Serial /
Synchronization port
A connector to support USB Host/Client and
serial functions
15 Scan window A window for scanning of barcode reader
16 Stylus Use the stylus for selecting items and entering
information.
17 Battery Cover Protect Battery pack, keep the switch of battery
cover to leave system from suspend mode
18 Battery cover Latch To keep Battery Cover locked
19 Hand Strap This strap can be sealed tighter or looser
20 Speaker 1W speaker for audio sound
21 DC Power Jack A connector to support AC power.
22 IrDA A module to support IrDA functions