User's Manual
Shin Chuan Computer
User’s Manual
SC800/SC820
B-3
WriteAFI
Write 2 bits AFI
(Application Family
Identifier) code to tag
card.
WriteDSFID
Write 2 bits DSFID (Data
Storage Format Identifier)
code to tag card.
Only input number,
Num = 0 ~ 255 or 0 ~ FF.
LockAFI
Lock AFI code of tag
card, the AFI code of tag
card will be not writing
after lock.
LockDSFID
Lock DSFID code of tag
card, the DSFID code of
tag card will be not writing
after lock.
ReadBlock
Write 8 bits data to
someone block of tag
card storage memory.
Only input hex number,
Num = 0 ~ FFFFFFFF.
LockBlock
Lock someone block data
of tag card storage
memory, the block data of
tag card will be not writing
after lock.
Block
Write /
Lock
Choose the block before
write / lock.
Writing Area
Input wanted to write into
data of tag card.
B.2 GPS Applicability
B.2.1 Setup Tab:
Sub Item Explaining Remarks
COM Port Select Default Æ COM7
Baud Rate Select Default Æ 4800
Scan Scan the COM port.
Start / Close GPS Start / Close GPS function.
Cold Start Refresh GPS function to default.
OPEN Enable the GPS Module.
Please Tap it
before use the
GPS.
CLOSE Disable the GPS device.