User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
1-9
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow operation
instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter except built-in tested devices.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match
the intended destination. The firmware setting is not accessible by the end
user.
Note: Wireless LAN, 2.4GHz Low Power Hyper and GPRS/EDGE cannot
be used at the same time.
Caution: SCC declares that SC800 ( FCC ID: TQ2-SC800PDT-BWG ) /
SC820 ( FCC ID: TQ2-SC800PDT-BWG ) is limited in CH1~CH11 for
2.4GHz by specified firmware controlled in U.S.A.
The FCC ID of SC800/SC820 is TQ2-SC800PDT-BWG
1.5.2 Hand-Operated Device SAR Evaluation: