User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
A-1
Appendix A GPRS Function
A.1 Using the GPRS Features
Use the PDT to make and receive data and send. Your service provider may
provide other useful services such as GPRS.
The PDT can also be used to connect to an Internet Service Provider (ISP) or
work network so you can browse the Web and read e-mail. You can connect to
the Internet or work network via GPRS (General Packet Radio Service).
A.1.1 SIM Card
A SIM (Subscriber Identity Module) card is required to operate the GPRS
features on your PDT. The SIM card is a plastic card embedded with a
computer chip that stores and transacts data. After the SIM card is activated by
your Telecom service provider, the computer chip will contain information about
your phone number, service, registration information, and contacts, as well as
memory to store text.
A.1.2 Inserting a SIM Card
Note: If the battery is already installed, you must remove it before inserting the
SIM card.
To insert the SIM card into the PDT:
Figure A-1 Insert SIM Card into PDT
1) Remove the battery cover and battery
2) Pushes the iron stock to front unlocks the slot and lifts the slot
3 Insert a correctly oriented SIM card.
4 Put down the slot and push the iron stock to back lock the slot).
5) Back to move the battery and battery cover.