User's Manual

Shin Chuan Computer
User’s Manual
SC800/SC820
3-56
3.2.21 System
Table 3-42 System
ICON ITEM & FUNCTION
z “General” Tab: (Figure 3-96)
9 To show:
¾
Firmware information
¾
Information about Processor type, Memory size,
Expansion card
z “Memory”: (Figure 3-97)
9 Move the slider to adjust memory allocation. Default
storage memory is normally is normally set to about 8MB
with the reminder assigned to Program memory.
9
Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM
size in Information properties and total memory size of
storage memory and program memory
z “Device Name” Tab: (Figure 3-98)
9 Your device uses this information to identify itself to other
computers.
9
The input panel will open to facilitate data entry.
9
To close the Device Name, press the “OK” button, or press
the <Enter> key on keypad.
z “Copyrights” Tab: (Figure3-99)
9 Refer to this tab for specific copyright data. As a user, you
are responsible to read this statement.