Shin Chuan Computer User’s Manual SC800/SC820 SC800/SC820 User’s Manual WinCE Rugged Portable Data Terminal July/10/2009 Ver: 1.
Shin Chuan Computer User’s Manual SC800/SC820 Revision History: Date Description 2008/12/18 Modified the contents of ch.3 and Appendix A GPRS Function 2009/2/16 Modified the contents of 2.5.8 Installing the SD Card 2009/6/16 Added Appendix B Expansion Module Applicability(RFID, GPS) 2009/6/19 Added “ Note: Wireless LAN, 2.4GHz Low Power Hyper and GPRS/EDGE cannot be used at the same time.
Shin Chuan Computer User’s Manual SC800/SC820 Table of Contents Chapter 1. Introduction ............................................................................1-1 1.1 About this Manual.................................................................1-1 1.2 User and Product Safety ......................................................1-2 1.3 Battery Safety.......................................................................1-3 1.4 CE Statement .........................................................
Shin Chuan Computer User’s Manual SC800/SC820 2.5 Navigating the Display........................................................2-18 2.5.1 Setting Time and Date ...............................................2-18 2.5.2 Entering the Data .......................................................2-18 2.5.3 The Command Bar.....................................................2-19 2.5.4 The Task Bar..............................................................2-19 2.5.5 The Soft Keypad ............................
Shin Chuan Computer User’s Manual SC800/SC820 3.2.18 Remove Programs ...................................................3-52 3.2.19 Storage Manager .....................................................3-53 3.2.20 Stylus .......................................................................3-54 3.2.21 System.....................................................................3-56 3.2.22 Terminal Server Client Licenses..............................3-58 3.2.23 Volume & Sounds Properties .....................
Shin Chuan Computer User’s Manual SC800/SC820 A.3.1 Connecting ................................................................. A-8 Appendix B Expansion Module Applicability.......................................... B-1 B.1 RFID Applicability................................................................ B-1 B.2 GPS Applicability ................................................................ B-3 Appendix C 2D Barcode Scanner Setting ............................................... C-1 C.1 Basic Tab ....
Shin Chuan Computer User’s Manual SC800/SC820 Chapter 1. Introduction Congratulations on purchasing the SC800/SC820 Portable Data Terminal (PDT), a Microsoft Windows®CE Rugged PDT. Its special combination of features makes it perfect for using in a wide range of applications. These features as: Intel® XScaleTM PXA270 520MHz 32 bits RISC Processor Windows® CE 5.0 Operating System 128MB SDRAM & 256MB/1GB Flash ROM Open Architecture: User Accessible SD Slot 240 x 320, 3.
Shin Chuan Computer User’s Manual SC800/SC820 1.2 User and Product Safety z Do not stare into the laser or LED beam directly or shine it into eyes. z Never use strong pressure onto the screen or subject it to severe impact, as the LCD panel could become cracked and possibility cause personal injury. If the LCD panel is broken, never touch the liquid inside because the liquid irritates the skin.
Shin Chuan Computer User’s Manual SC800/SC820 1.3 Battery Safety CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. Lithium-ion battery packs might get hot, explode, ignite and/or cause serious injury if exploded by abusive using. Please follow the safety warnings listed as below: z Do not throw the battery pack in fire. Do not expose the battery to high temperatures.
Shin Chuan Computer User’s Manual SC800/SC820 1.4 CE Statement 1.4.1 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
Shin Chuan Computer User’s Manual SC800/SC820 - EN 301 489-1 V1.6.1: (2005-09) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements - EN 301 489-17 V1.2.
Shin Chuan Computer User’s Manual SC800/SC820 Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Shin Chuan Computer User’s Manual SC800/SC820 Nederlands van toestel] in overeenstemming is met de essentiële eisen en [Dutch] de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar Alulírott, [gyártó neve] nyilatkozom, hogy a [...
Shin Chuan Computer User’s Manual SC800/SC820 1.5 FCC Statement 1.5.1 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Shin Chuan Computer User’s Manual SC800/SC820 instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except built-in tested devices.
Shin Chuan Computer User’s Manual SC800/SC820 LED AND LASER SAFETY INFORMATION z Class I LED/ Class II Laser Product z Do not stare at the LED/Laser or shine into eyes z Do not allow young children to use the product without adult supervision z Do not replace/repair the LED/Laser, these are not user replaceable z Do not shine the LED/Laser on a shiny reflective surface z LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT 1.6 Recycling & disposal instructions.
Shin Chuan Computer User’s Manual SC800/SC820 1.8 Product Labeling The PDT has several labels as showed in Figure 1-1 to 1-4. A. SC800 Figure 1-1 Product Labeling (Front side view) Label nr.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 1-2 Product Labeling (Back side view) Label nr. Description 4 Laser radiation warning label 5 Serial / Configuration number 6 PenPower label (only use on Simplified Chinese version) 7 CCC label (only use with China) 8 System and regulatory label 9 NCC label (only use on Traditional Chinese version) 10 RoHS Use Life Label for China 11 Windows CE .
Shin Chuan Computer User’s Manual SC800/SC820 B. SC820 Figure 1-3 Product Labeling (Front side view) Label nr.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 1-4 Product Labeling (Back side view) Label nr. Description 4 LED/Laser radiation warning label 5 Serial / Configuration number 6 PenPower label (only use on Simplified Chinese version) 7 CCC label (only use with China) 8 System and regulatory label 9 NCC label (only use on Traditional Chinese version) 10 RoHS Use Life Label for China 11 Windows CE .
Shin Chuan Computer User’s Manual SC800/SC820 1.9 System Specifications The SC800 / SC820 detailed specifications as follows. Unless otherwise noted, all the specifications are subject to change without prior notification. Table 1-5 System Specification SC800 / SC820 Processor - Intel PXA270 520MHz 32 bits RISC CPU Memory - 256MB/1GB Flash ROM - 128MB SDRAM Display - 240 x 320 3.
Shin Chuan Computer User’s Manual SC800/SC820 SC800 / SC820 SC800 - One Power Button - One Reset Button - Three Barcode Scanner Buttons - Two Navigation Buttons - Four Application Buttons - One 18-key Numeric Keypad - One Reserved Button SC820 - One Power Button - One Reset Button - Three Barcode Scanner Buttons - Two Navigation Buttons - Four Application Buttons - One 33-key Alpha-Numeric Keypad - One Reserved Button Keypad / Buttons Dimensions and Weight - Dimensions: L: 155mm, W: 82mm, H: 31~33mm
Shin Chuan Computer User’s Manual SC800/SC820 1.10 Environment Standard Table 1-6 Environment Standards Operating Temperature 14oF ~ 122oF( -10oC ~ 50oC) Storage Temperature -4oF ~ 158oF (-20oC ~ 60oC) Humidity 5% ~ 95% (non-condensing) Drop 5ft (1.5m) Drop onto Concrete Water & Dust proof IP65 Certificated Vibration MIL STD 810F 1.
Shin Chuan Computer User’s Manual SC800/SC820 Chapter 2. Getting Started 2.1 Check the package Open the package and check all the parts are inside without shortage and damage: A. SC800 Figure 2-1 Inside the package 1. 2. 3. 4. 5. 6. 7. SC800 Terminal Standard Battery Pack (3.7VDC/2200mAh) USB Client Cable for Terminal AC Power Cord Standard AC Adapter 5VDC/2.
Shin Chuan Computer User’s Manual SC800/SC820 B. SC820 Figure 2-2 Inside the package 1. 2. 3. 4. 5. 6. 7. SC820 Terminal Standard Battery Pack (3.7VDC/2200mAh) USB Client Cable for Terminal AC Power Cord Standard AC Adapter 5VDC/2.
Shin Chuan Computer User’s Manual SC800/SC820 2.2 General View of the PDT 2.2.
Shin Chuan Computer User’s Manual SC800/SC820 Table 2-1 Description of SC800 General View 1 2 3 Scanner LED Indicator “Red” color Charge LED Indicator “Red” color 3 color LED Indicator “Blue” color Reading barcode “Green” color Successful reading Charging battery “Green” color Battery charged full 2.
Shin Chuan Computer User’s Manual SC800/SC820 2.2.
Shin Chuan Computer User’s Manual SC800/SC820 Table 2-2 Description of SC820 General View 1 2 3 Scanner LED Indicator “Red” color Charge LED Indicator “Red” color 3 color LED Indicator “Blue” color Reading barcode “Green” color Successful reading Charging battery “Green” color Battery charged full 2.
Shin Chuan Computer User’s Manual SC800/SC820 2.3 Charging the Battery Pack Before using the PDT, perform the basic procedure of charging the battery pack through the following steps. 2.3.1 Installing the battery pack 1. On the PDT attached with a hand-strap, detach and loose the hand-strap. Figure 2-7 Release the Hand strap from PDT 2. Turn the locking latches (right and left) downwards and lift the battery cover away from the PDT.
Shin Chuan Computer User’s Manual SC800/SC820 3. Insert the battery pack into the battery compartment with the label facing out, and ensuring the battery snaps into place. Figure 2-9 Insert the battery pack 4. Replace the battery cover by inserting the top first, and then press the bottom in firmly. Turn the locking latches (right and left) upwards to secure the cover to the PDT. Figure 2-10 Replace the battery cover 5. Charge time.
Shin Chuan Computer User’s Manual SC800/SC820 ◆. When charging the battery pack, the charge LED indicator on the PDT turns on Red. After the battery pack is fully charged, the charge LED indicator turns to Green. 2.3.2 Charging the battery pack with Power Adapter 1. Connect the Power cord to the Power adapter. 2. Plug in the connector of the power adapter. 3. Connect the power cord to a power source.
Shin Chuan Computer User’s Manual SC800/SC820 2.4. Handling the PDT 2.4.1 Starting the PDT Press the Power key to turn on/off the PDT. If the PDT does not power on, perform a cold boot. See 2-7 Resetting the PDT. CAUTION: When a battery is fully inserted in PDT for the first time, upon the PDT’s first power up, the device boots and powers on automatically. When the PDT is powered on for the first time, it initializes its system.
Shin Chuan Computer User’s Manual SC800/SC820 2.4.3 Calibration of the touch Screen On the initial boot-up of the PDT, the stylus calibration screen (Labeled Align Screen) opens. Use the stylus to press and hold briefly on the center of each target as it moves around the screen. If necessary, adjust the backlight on the PDT to make the screen readable. (See below 2.4.4. Adjust the brightness).
Shin Chuan Computer User’s Manual SC800/SC820 2.4.6 Using the Stylus The stylus is located next to hand-strap on the left rear of the PDT. The stylus function is same as the mouse on a PC. Use the stylus to: 1) Navigate the display, select menu item and open optional applications. 2) Tap the characters on soft keyboard panel. 3) Hold the stylus on the screen and drag across the screen to select the list of multiple items.
Shin Chuan Computer User’s Manual SC800/SC820 Key Main Function Alpha + Caps + Main Function Fn + Main Function Inbox File Explorer Up Left Down Right TAB (Tabulation) ESC Caps Audio Mute Function change Change to letters Backspace 1 ＠ (at) 2 B C 3 ’ (Quotation Marks) A ＋ (Plus Sign) D E F 4 Paste G H I 5 Del (Delete) － (Minus Sign) J K L M N O P Q R 8 Copy ＆ (AND) T U V 9 X (Multiplication) 0 ＊ (Asterisk) Space W ［ 6 7 ＃ Start Menu ／ (Division) ： .
Shin Chuan Computer User’s Manual SC800/SC820 2.4.
Shin Chuan Computer User’s Manual SC800/SC820 Key Fn + Main Function Main Function Caps + Main Function Enter Function change Space a ~ A b $ B c + C d 1 D e 2 E f 3 F g ! G h % H i － (Minus Sign) I j 4 J k 5 K l 6 L m Copy M n @ N 2-15
Shin Chuan Computer User’s Manual SC800/SC820 Key Fn + Main Function Main Function Caps + Main Function o \ O p ＊ P q 7 Q r 8 R s 9 S t Paste T u # U v & V w / W x . (Point) X y 0 Y z = Z Table 2-6 Special Assembler Key Assembler Key Functionality Reset Key Warm Reset + Reset Cold Reset Key Definition Press “Reset” button in the back. Press “Power” and “Reset” button simultaneously.
Shin Chuan Computer User’s Manual SC800/SC820 2.4.9 Using the Ear/Microphone Connect Ear/Microphone to PDT earphone jack connector. The PDT has built in microphone; but if you do want to record the voice, you have to use the packed Ear/Microphone.
Shin Chuan Computer User’s Manual SC800/SC820 2.5 Navigating the Display 2.5.1 Setting Time and Date In the Date/Time options, you can change the year, month, date, time, time zone, or select automatic adjust for Daylight Saving Time. To set or change the date and time: 1. Select Start > Settings > Control Panel > Date/Time 2. To change the year, select the year or open a numeric dial. Select the up arrow to increase the value; select the down arrow to decrease the value.
Shin Chuan Computer User’s Manual SC800/SC820 Select text in the same way you select the text on a PC. Use the stylus to highlight the desired text by dragging the stylus across the desired text, double-tapping to select one word and triple-rapping to select an entire line/paragraph. Refer to “2.5 Navigating the Display” starting. z Use the soft input panel (digital keyboard) with the stylus. z Use the bar code scanning to enter data. Press the trigger or “Barcode Scan” key to initiate a scan.
Shin Chuan Computer User’s Manual SC800/SC820 2.5.5 The Soft Keypad In applications that accept keypad input, the soft input panel (SIP) can be used to enter data using the stylus. The SIP is digital, QWERTY-style keyboard. To open the SIP, tap the keyboard icon to open the menu and select Hide Input Panel to close the keyboard. Use the stylus to select letters, numbers, or symbols from the Soft Input Panel for the current application. 2.5.
Shin Chuan Computer User’s Manual SC800/SC820 Inside the Summit directory are two items: a directory for the storage of security certificates and an SCU icon. To run SCU, double-click the SCU icon SCU has five tabs: Main, Profile, Status, and Diags, and Global. Each tab is described in more detail in this section. z Main Tab Figure 2-19 Main Tab z Enable/Disable Radio: When the radio is enabled, selecting this button disables it; when the radio is disabled, selecting this button enables it.
Shin Chuan Computer User’s Manual SC800/SC820 z z SCU: Indicates the version of SCU that is running on the device. About SCU: When tapped, supplies information on SCU that on a Windows application normally would appear under Help\About. Profile Tab Profile settings are radio and security settings that are stored in the registry as part of a configuration profile. When a profile is selected as the active profile on the Main tab, the settings for that profile become active.
Shin Chuan Computer User’s Manual SC800/SC820 -Rename: Give the profile a new name, one that is not assigned to another profile -Delete: Delete the profile, provided that it is not the active profile. -Scan: Open a window that lists access points that are broadcasting their SSIDs. Each time you tap the Refresh button, you view an updated list of APs, with each row showing an AP’s SSID, its received signal strength indication (RSSI), and whether or not data encryption is in use (true or false).
Shin Chuan Computer User’s Manual SC800/SC820 - WPA2 or WPA with dynamic keys (derived from the EAP authentication process) WPA2 or WPA with pre-shared keys Static WEP keys Consult the user’s guide for details on all profile settings, including security settings. Status Tab The Status tab provides status information on the radio.
Shin Chuan Computer User’s Manual SC800/SC820 Diags Tab Figure 2-22 Diags Tab z (Re)connect: Disable and enable the radio, apply or reapply the current profile, and attempt to associate and authenticate to the wireless LAN, logging all activity in the output area at the bottom. z Release/Renew: Obtain a new IP address through DHCP release/renew, and log all activity in the output area at the bottom. z Start Ping: Start a continuous ping to the address in the edit box next to it.
Shin Chuan Computer User’s Manual SC800/SC820 An administrator can define and change most global settings on the Global Settings Tab in SCU. Figure 2-23 Global Tab The default setting for each global setting ensures reliable operation in most environments. Consult the user’s guide for details on all global settings. 2.5.7 Reading barcodes, 1D laser version. To use the scanning function, complete the following steps: 1.
Shin Chuan Computer User’s Manual SC800/SC820 6. Good scanning position. The reading range is from 40 to 300mm distance. 1) Decrease the scanning distance to the bar code when scanning small barcodes. 2) Increase the scanning distance from the bar code when scanning large barcodes 3) The scanning area is visible by a red laser beam. 7. Bad scanning position. 1) Make sure that the laser beam sweeps across whole bar code. 2) Scanning operations may fail if the laser beam is positioned as below. 8.
Shin Chuan Computer User’s Manual SC800/SC820 5. Good scanning position. The reading range is from 45 to 260mm distance. 1) Decrease the scanning distance to the bar code when scanning small barcodes. 2) Increase the scanning distance from the bar code when scanning large barcodes 3) The bar code should be located within the green light spots 4) The scanning area is visible by a red illumination area. 6. Bad scanning position. 1) Make sure that the laser beam sweeps across whole barcode.
Shin Chuan Computer User’s Manual SC800/SC820 2.5.9 Installing the SD Card 1. On the PDT attached with a hand-strap, detach and loose the hand-strap. Figure 2-24 Release the Hand strap from PDT 2. Turn the locking latches (right and left) downwards and lift the battery cover away from the PDT.
Shin Chuan Computer User’s Manual SC800/SC820 3. Detach SD Holder and Insert the SD Card into the SD Slot. Figure 2-26 Detach the SD Holder from PDT 1 2 3 2.5.10 Help To tap “?” can get help information for each program. 2.6 Power management 2.6.1 Suspend Mode The PDT will go into a suspend mode when it is idle for a period of time.
Shin Chuan Computer User’s Manual SC800/SC820 Suspending: The following conditions will suspend: z Press key while the unit is on. z The duration timer of item “Switch state to Suspend” expires, which indicates that there has been no use for a specified of time. z The battery pack is completely discharged. z Tap Start > Suspend Tap here to let PDT into suspend mode 2.6.2 Resuming Use one of following methods to resume (wake up the PDT): z Press key to suspend or resume (wake up).
Shin Chuan Computer User’s Manual SC800/SC820 After Warm Reset: z The desktop appears with the application shortcuts on the screen. z The custom settings in the registry are persistent. 2.7.2 Cold Reset 1) You can use Cold Reset to initiate device if WINCE.NET OS lock up or Warm Reset still can’t work 2) To perform Cold Reset, press “ Power ” and “ Reset ” button simultaneously. 3) Device will initiate boot up after Cold Reset. CAUTION: Only use the Warm Reset.
Shin Chuan Computer User’s Manual SC800/SC820 Chapter 3. Setting 3.1 Introduction To view available options for PDT’s setting, tap Start > Settings. Then, there are three items inside “Control Panel”, “Network and Dial-up” and “Taskbar and Start”. 3.2 Control Panel To view the Control Panel and settings you can modify by tapping Start > Settings > Control Panel. Figure 3-1 Control Panel 3.2.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.1.1 “Basic” Tab Figure 3-2 Basic Tab Table 3-1 Basic Description Field Name Beep After Scan OK Scan Timeout (sec) Termination Code Description Select the numbers of beep tone after scan OK. None After scanning the barcode, do not give out beep sound. One Time After scanning the barcode, give out beep one time. Two Times After scanning the barcode, give out beep two times. Select the scanning timeout duration (in seconds) from this pull-down list.
Shin Chuan Computer User’s Manual SC800/SC820 Field Name Keyboard Message Description Select a method based upon the barcode scanning application you will use. Type Writing A unit continues a unit, fast showing barcode number. Copy & Paste Once show barcode number. Disable Not show the barcode number.
Shin Chuan Computer User’s Manual SC800/SC820 Table 3-2 Bar Code List Description Barcode Symbology Description Type A. Numeric-only Barcodes UPC-E Compressed version of UPC code for use on small products. UPC-A Universal product code seen on almost all retail products in the USA and Canada. EAN-13 / ISBN EAN-13: European Article Numbering international retail product code. ISBN: Special use of the EAN-13 symbol to used internationally to mark books.
Shin Chuan Computer User’s Manual SC800/SC820 Code128 / UCC EAN128 Very capable code, excellent density, high reliability; in very wide use world-wide. Widely used data formatting model for Code 128 Type C. Others Barcodes China Post Used by China Postal Service for automated mail sorting. Code 4 --- GTIN Global Trade Identification Number Korea Code 3 of 5 --- RSS Reduced Space Symbology 3.2.1.
Shin Chuan Computer User’s Manual SC800/SC820 User Define Establish number by oneself. Barcode List Set 1 ~ Set 5: defaults setting. User Define: select barcode to define. Default Press “Default” button to reset all configuration setting of “Code ID” Tab into default values.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-5 BarCode Setup 3.2.2 Symbologies List A Type -- Numeric-only Barcodes 3.2.2.
Shin Chuan Computer User’s Manual SC800/SC820 Table 3-5 UPC-E Description Item Format Description Ignore 1st digit Do not transmit 1st digit by barcode. Transmit 1st digit Transmit 1st digit by barcode. Send Check Digit Whether send check digit by barcode. 3.2.2.2 UPC-A UPC-A movements together with EAN-13, so only Enable EAN-13 then UPC-A will be Enable, too. Figure 3-7 UPC-A Table 3-6 UPC-A Description Item Format Description Ignore 1st & 2nd digits Do not transmit 1st digit by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.3 EAN-13 / ISBN Figure 3-8 EAN-13 / ISBN Table 3-7 EAN-13 / ISBN Description Item Format Description Ignore 1st & 2nd digits Do not transmit 1st digit by barcode. Transmit 1st digit Transmit 1st digit by barcode. Transmit 2nd digit Transmit 2nd digit by barcode. Transmit 1st & 2nd digits Transmit 1st & 2nd digits by barcode. Send Check Digit Whether send check digit by barcode. Enable ISBN Code Whether use this ISBN Code.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.4 EAN-8/JAN-8 Figure 3-9 EAN-8/JAN-8 Table 3-8 EAN-8/JAN-8 Description Item Format Description Ignore 1st digit Do not transmit 1st digit by barcode. Transmit 1st digit Transmit 1st digit by barcode. Send Check Digit Whether send check digit by barcode. Convert to EAN-13 When this option is selected the scanner will convert EAN-8 to EAN-13 by transmitting five zeroes … Add five 0 Ahead of code Add five zeroes at prefix of the barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.5 UPC-EAN Add on 2/5 A. UPC-E, UPC-A, EAN-13 / ISBN and EAN-8 / JAN-8 may all include an additional barcode to the right of the main barcode. B. This barcode will show primary & additional code together. C. So the UPC-EAN Add-ON 2/5 code is unable to use alone, must operate in UPC-E or UPC-A or EAN-13 / ISBN or EAN-8 / JAN-8.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.6 Industrial 2 of 5 / IATA Figure 3-11 Industrial 2 of 5 / IATA Table 3-10 Industrial 2 of 5 / IATA Description Item Description Send Check Digit Whether send check digit by barcode. Enable IATA Code Whether use this IATA Code. Checksum Length Verify Whether verify checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.7 Interleaved 2 of 5 Figure 3-12 Interleaved 2 of 5 Table 3-11 Interleaved 2 of 5 Description Item Description Send Check Digit Checksum Length Whether send check digit by barcode. Verify Whether verify checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.8 Plessey / MSI Figure 3-13 Plessey / MSI Table 3-12 Plessey / MSI Description Item Format Description Mode 10 Mode 10-10 Checksum mode for this barcode. Mode 11-10 Send Check Digit Whether send check digit by barcode. 1 Digit Check 1 digit & send by checksum. 2 Digits Check 2 digits & send by checksum.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.9 Code11 Figure 3-14 Code 11 Table 3-13 Code 11 Description Item Send Check Digit Description Whether send check digit by barcode. 1 Digit Check 1 digit & send by checksum. 2 Digits Check 2 digits & send by checksum.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.10 Codabar / NW7 Figure 3-15 Codabar / NW7 Table 3-14 Codabar / NW7 Description Item Description Start / Stop Digit Whether transmit Start & Stop Digit. ABCD abcd TN*E Start / Stop transmit type tn*e Checksum Verify Whether verify checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.11 Matrix 2 of 5 Figure 3-16 Matrix 2 of 5 Table 3-15 Matrix 2 of 5 Description Item Description Send Check Digit Checksum Length Whether send check digit by barcode. Verify Whether verify checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 B Type -- Alphanumeric Barcodes 3.2.2.12 Code39 / Code32 Figure 3-17 Code39 / Code32 Table 3-16 Code39 / Code32 Description Item Format Code39 Standard Enable Code 39 Standard characters Code39 Full ASCII Enable Code 39 Full ASCII character Code32 Enable Code 32 Start / Stop Digit Checksum Description Whether transmit Start & Stop Digit. Verify Whether verify checksum by barcode. Transmit Whether transmit checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.13 Code93 The barcode does not have setting. Figure 3-18 Code93 3.2.2.14 Code128 / UCC EAN128 Figure 3-19 Code 128 / UCC EAN128 Table 3-17 Code128 / UCC EAN128 Description Item Enable UCC128/EAN128 Description Enable UCC128/EAN128.
Shin Chuan Computer User’s Manual SC800/SC820 C Type -- Others Barcodes 3.2.2.15 China Post Figure 3-20 China Post Table 3-18 China Post Description Item Checksum Description Verify Send Check Digit Length Min-Max (Default: 4 / 48) Fixed Whether verify checksum by barcode. Whether send check digit by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.16 Code4 The barcode does not have setting. Figure 3-21 Code4 3.2.2.17 GTIN The barcode does not have setting.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.2.18 Korea Code 3 of 5 The barcode does not have setting. Figure 3-23 Korea Code 3 of 5 3.2.2.19 RSS Figure 3-24 RSS Table 3-19 RSS Description Item Convert to UCC128 Checksum Verify Description The scanner will convert RSS to UCC128. Whether verify checksum by barcode.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.3 Bluetooth Device Properties Table 3-20 Bluetooth Device Properties ICON ITEM & FUNCTION z “BT Service” Tab: (Figure 3-25) 9 Tap the “Enable Bluetooth Device” to enable Bluetooth device(Figure 3-26). Wait for 20 seconds in order to initialize the Bluetooth hardware correctly. 9 9 Click “Scan Device Service” to pop “Bluetooth Manager” window. Then tap the Scan Device button to initiate a scan for Bluetooth hardware.
Shin Chuan Computer User’s Manual SC800/SC820 9 Port” tab, and will see the devices you had trusted or active. Select the device that you want to map a virtual com and which virtual com you want to use. Now COM1 has mapped for BT device.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-29 Bluetooth Error Windows Figure 3-30 Bluetooth Manager Windows Figure 3-31 Bluetooth Enter PIN Windows Figure 3-32 Bluetooth Manager Windows 3-25
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-33 Bluetooth Manager Windows Figure 3-34 Bluetooth Manager Windows Figure 3-35 Bluetooth Manager Windows Figure 3-36 Bluetooth Manager Windows Note: If the device to which the mobile computer is bonding does not appear in the list, ensure it is turned on, in discoverable mode, and within range (30 feet / 10 meters) of the mobile computer.
Shin Chuan Computer User’s Manual SC800/SC820 Table 3-21 Bluetooth Icon Icon Description Unknown device icon Device is not defined Locked icon Device is locked and cannot be bonded to. Not locked icon Device is not locked and can be bonded to. Bluetooth device icon Bluetooth device Bonded device icon Bonded Bluetooth device Mobile device icon Device is a mobile device Phone icon Device is a phone. Printer icon Device is a printer Network icon Device is a network.
Shin Chuan Computer User’s Manual SC800/SC820 z “Store” Tab: (Figure 3-39) 9 To add a certificate or associated private key to the 9 selected store, select “Import” (Figure 3-39). To view more details of the selected certificate, such as the 9 expanded name or expiration date, choose “View”. To delete the selected certificate from the store, choose “Remove”.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-41 Certificates 3.2.5 Control Center The Control Center includes four AP, listed the following..
Shin Chuan Computer User’s Manual SC800/SC820 3.2.5.1 Information Table 3-23 Information ICON ITEM & FUNCTION z “Information” Tab: 9 Provide Software version, MAC address, Bluetooth ID, Serial No. and Configuration No. 3.2.5.2 Brightness Table 3-24 Brightness ICON ITEM & FUNCTION LCD Brightness: (Figure 3-43) Set the LCD brightness by adjusting the slider from low to high Amounts 5 steps: Every step have corresponding picture of self. 0. 1. 5. Battery Power, and device is idle for more than 2.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-43 Brightness 3.2.5.3 Fn-key Settings Table 3-25 Fn-Key ICON ITEM & FUNCTION z Fn-Key Setting: (Figure 3-44) Fn Key The Application Program of default setting F1 Internet Explorer F2 Microsoft WordPad F3 Inbox F4 Windows Explorer 9 To assign your favorite application program to Hot Keys. 9 9 Choose one of Hot Keys from pull-down list.(Figure 3-44) To tap “Browse…” inside “Assign program” applet.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-44 Fn-Key Settings Figure 3-45 Fn-Key Settings 3.2.5.4 Backup Restore Table 3-26 Backup Restore ICON ITEM & FUNCTION 1. You can backup/restore system to/from flash disk or inserted memory card. (Disk on Chip, or SD Card) (Figure 3-46) 2. When you launch this AP, it must check backup file in DOC first. And if you select other storage, it will check again. 3.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-46 Backup Restore Figure 3-47 Backup & Restore Start Figure 3-48 Backup OK Figure 3-49 Restore OK 3-33
Shin Chuan Computer User’s Manual SC800/SC820 3.2.6 Date/Time Table 3-27 Date/Time ICON ITEM & FUNCTION z “Date/Time” Tab: (Figure 2-14) 9 Please see the detail information of 2.5.1 Setting Time and Date on P.2-21 3.2.7 Dialing Properties Table 3-28 Dialing properties ICON ITEM & FUNCTION z “Dialing Properties” Tab: (Figure 3-50) 9 In the When dialing from list, select the “Location” where you want to change settings.(Figure 3-50) To create a new location, select “New”.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-50 Dialing Properties Figure 3-51 Dialing Properties Figure 3-52 Dialing Properties Figure 3-53 Dialing Properties 3-35
Shin Chuan Computer User’s Manual SC800/SC820 3.2.8 Display Properties Table 3-29 Display properties ICON ITEM & FUNCTION z “Background” Tab: (Figure 3-54) 9 9 From the “Image” list, select an image you want as the background of the desktop.(Figure 3-55) To locate an image in another folder, select 9 “Browse”.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-54 Display properties Figure 3-55 Display properties Figure 3-56 Display properties Figure 3-57 Display properties 3-37
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-58 Display properties 3.2.9 Input Panel Table 3-30 Display properties ICON ITEM & FUNCTION z “Input panel” Tab: (Figure 3-59) 9 Select the input method you want to change. 9 To change the Soft Keyboard Options , tap “Option” (Figure 3-60) z “Options” Tab: (Figure 3-60) 9 Change the soft keyboard options as desired, selecting from: Large or small keys Using gestures for space, black-space shift, and enter.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-59 Input Panel Properties Figure 3-60 Input Panel Properties 3.2.10 Internet Options Table 3-31 Internet Options ICON ITEM & FUNCTION z “General” Tab: (Figure 3-61) Type in the URL of desired start page and the desired search engine. You also change the Cache Size, clear the Cache and Clear the History.. “Connection” Tab: (Figure 3-62) 9 Modify the network access setting as desired.
Shin Chuan Computer User’s Manual SC800/SC820 ○ ○ ○ Never Always Hover Figure 3-61 Internet Settings Figure 3-62 Internet Settings Figure 3-63 Internet Settings Figure 3-64 Internet Settings 3-40
Shin Chuan Computer User’s Manual SC800/SC820 3.2.11 Keyboard Table 3-32 Keyboard ICON ITEM & FUNCTION z “Repeat” Tab: (Figure 3-65) 9 To change the amount of time between depressions before repetition starts, adjust the Repeat delay slider 9 To change the repeat rate, adjust the Repeat rate slider. Test your new setting. 9 Tap “ OK” to exit the “Keyboard” Tab.
Shin Chuan Computer User’s Manual SC800/SC820 3.2.12 Network and Dial-up Connections Table 3-33 Network and Dial-up Connections ICON ITEM & FUNCTION z “Connection” Tab: (Figure 3-66) 9 To create a “Dial-up Connection”: Double-tap the “Make New connection”. In the “Make New Connection” dialog box, enter a name for the connection.(Figure 3-67) Select “Dial-Up Connection”. ¾ ¾ ¾ ¾ Select the “Next” button. Select the modem you want use.
Shin Chuan Computer User’s Manual SC800/SC820 in the Make New Connection Wizard. If you can’t connect using the default settings, contact your ISP or access your ISP’s Web site for specific TCP/IP information as well as primary and secondary DNS address. 9 ¾ ¾ ¾ ¾ Modify connection setting Select Start > Settings > Network and Dialup Connections Select the icon for connection settings you want to modify. Select File > Properties, or double- tap the appropriate icon. Select desired options.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-68 Network and Dial-up Figure 3-69 Network and Dial-up Connections Connections Figure 3-70 Network and Dial-up Figure 3-71 Network and Dial-up Connections Connections 3-44
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-72 Network and Dial-up Figure 3-73 Network and Dial-up Connections Connections Figure 3-74 Network and Dial-up Figure 3-75 Network and Dial-up Connections Connections 3-45
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-76 Network and Dial-up Figure 3-77 Network and Dial-up Connections Connections 3.2.13 Owner Table 3-34 Owner ICON ITEM & FUNCTION z “Identification” Tab: (Figure 3-78) 9 Fill in or edit the data as desired. To have this information displayed when you start your 9 9 device, select “Display Owner Identification” at Power On. To set up identification for remote networks, see Setting up identification for remote networks.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-78 Owner Properties Figure 3-79 Owner Properties Figure 3-80 Owner Properties 3-47
Shin Chuan Computer User’s Manual SC800/SC820 3.2.14 Password Table 3-35 Password ICON ITEM & FUNCTION z “Password Setting” Tab: (Figure 3-81) 9 Enter the password In the “Confirm password “box, enter the password again. To require the password on startup, select “Enable password protection at power- on“. and/or select “Enable password protection for screen saver” To exit the Password control panel, press “OK” from the control bar, or press the key on the keypad.
Shin Chuan Computer User’s Manual SC800/SC820 9 9 9 Tap the “Change Connection…” button to modify the connection method from USB or Serial. (Figure 3-83) To exit the “Change Connection” dialog, press “OK” from the control bar, or press the key on the keypad. To exit the “PC Connection” properties control panel, press “OK” from the control bar, or press the key on the keypad. Figure 3-82 PC Connection Figure 3-83 PC Connection 3.2.
Shin Chuan Computer User’s Manual SC800/SC820 9 is around 0% To exit Battery control panel, press “OK” from the command bar, or press key on keypad. z “Schemes” Tab: (Figure 3-85) 9 The Scheme Tab allows you to determine the time to switch state to Suspend mode when using either Battery Power or AC Power. Select Battery Power or AC Power as the power scheme from the pull-down list.( Figure 3-86) Select the time to suspend mode from the pull-down list.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-86 Power Figure 3-87 Power Figure 3-88 Power 3-51
Shin Chuan Computer User’s Manual SC800/SC820 3.2.17 Regional Settings Table 3-38 Regional Settings ICON ITEM & FUNCTION z “Region” Tab: (Figure 3-89) 9 Select the desired location/language. Review the Appearance samples in the bottom half of the screen. Select the Tab at the top for any settings you wish to change, Options to modify include Number, Currency, Time, and Date. 9 9 Figure 3-89 Regional Settings 3.2.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-90 Regional Settings 3.2.19 Storage Manager Table 3-40 Storage Manager ICON ITEM & FUNCTION z “Storage Manager” Tab: (Figure 3-91) To change Storage properties control panel default settings: Insert. Compact Flash(CF) or Secure digital (SD) storage card into the unit. 9 ¾ Select Start > Settings > Control Panel > Storage ¾ Properties From the “Storage Info” pull-down list, select the desired storage device.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-91 Storage Manager 3.2.20 Stylus Table 3-41 Stylus ICON ITEM & FUNCTION z “Double-Tap” Tab: (Figure 3-92, Figure 3-93) 9 Double-tap the checkerboard grip at a comfortable speed. Double-tap clapboard to test your settings The function is OK if the figures are changed from Figure 3-84 to Figure 3-85. 9 9 9 To tap “OK” to exit the Stylus Properties.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-92 Stylus Properties Figure 3-93 Stylus Properties Figure 3-94 Stylus Properties Figure 3-95 Stylus Properties 3-55
Shin Chuan Computer User’s Manual SC800/SC820 3.2.21 System Table 3-42 System ICON ITEM & FUNCTION z “General” Tab: (Figure 3-96) 9 To show: ¾ Firmware information ¾ Information about Processor type, Memory size, Expansion card z “Memory”: (Figure 3-97) 9 Move the slider to adjust memory allocation. Default storage memory is normally is normally set to about 8MB with the reminder assigned to Program memory. 9 Press the “OK” key on the Keypad.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-96 System Properties Figure 3-97 System Properties Figure 3-98 System Properties Figure 3-99 System Properties 3-57
Shin Chuan Computer User’s Manual SC800/SC820 3.2.22 Terminal Server Client Licenses Table 3-43 Terminal Server Client Licenses ICON ITEM & FUNCTION z “Terminal Server Client Licenses” Tab: (Figure 3-100) 9 The section allow users can connect to Terminal Server, If the user has License. Figure 3-100 Terminal Server Client Licenses 3.2.23 Volume & Sounds Properties Table 3-44 Volume & Sound ICON ITEM & FUNCTION z “Volume” Tab: (Figure 3-101) 9 The factory default for Volume is the forth level.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-101 Volume & Sound Figure 3-102 Volume & Sound 3.3 Taskbar and Start Menu Table 3-45 Taskbar and Start menu ICON Taskbar and Start Menu ITEM & FUNCTION z “General” Tab: (Figure 3-104) 9 In this tab, You can change the position of the Taskbar and Start menu ¾ ¾ ¾ Is always on top or not Auto hide or not Show Clock or not z “Advanced ” Tab: (Figure 3-105) 9 Tap the “Clear” button to remove the contents of the Documents Menu.
Shin Chuan Computer User’s Manual SC800/SC820 Figure 3-103 Taskbar and Start Menu Figure 3-104 Taskbar and Start MenuGeneral Figure 3-105 Taskbar and Start MenuAdvanced 3-60
Shin Chuan Computer User’s Manual SC800/SC820 Chapter 4. Communication 4.1 Installing & Setting Up Microsoft ActiveSync 4.1.1 Installing Microsoft ActiveSync on the Host PC Microsoft ActiveSync is a file transfer tool to synchronize the files on a PC with the files on your PDT. To install Microsoft ActiveSync, complete the following steps on the PC: 1. Go to the Microsoft Windows CE.NET website and download the latest current version of ActiveSync: http://www.microsoft.
Shin Chuan Computer User’s Manual SC800/SC820 your desktop computer. This file enables your desktop computer to recognize your device. Only devices that have a partnership with a desktop computer can synchronize information between the two computers. For more information on partnerships, please refer to your Microsoft ActiveSync documentation or help file.
Shin Chuan Computer User’s Manual SC800/SC820 4.2.2 ActiveSync File Synchronization ActiveSync files synchronization requires an ActiveSync partnership between the PDT and the Host PC. Refer to “Setting up a Partnership”, above: 9 Select the files in the synchronization configuration for the PDT partnership. 9 Select Tools > Options from the ActiveSync command bar to configure the synchronization options.
Shin Chuan Computer User’s Manual SC800/SC820 Chapter 5. Software Applications 5.1 Introduction The PDT includes Inbox, MediaPlayer,….. You can switch to any software program by tapping the Start Menu. 5.2 Software Applications 5.2.1 Inbox Use Inbox to send and receive e-mail messages in the following ways: 9 Synchronize e-mail messages with Microsoft Exchange or Outlook on the Host Computer.
Shin Chuan Computer User’s Manual SC800/SC820 instructions in wizard. When finished, select Inbox in the Taskbar and continue setting up Inbox. ¾ ¾ Server(IMPA4 only): Enter the name of he mail server you use to receive and send messages. ¾ User ID: Enter the user name or mailbox ID assigned to you. Password: Enter the password you use to access this mail account.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ Display a message box when new mail arrives (IMAP4 only): Select to be informed that new mail has arrived. ¾ Send using MIME format (POP3 only): Select to send messages with extended characters. ¾ 9 Only display messages from last 3 days: Select how many day’s messages you want downloaded.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ ¾ messages and selecting Services> Get Full Copy. Get file attachments and meeting requests (IMAP4 only): Select to download and store meeting requests and message attachments when getting full copies of messages. This setting applies you have chosen to download full copies of messages by default, or if you selectively download full copies of messages by opening the message and selecting Services> Get Full Copy Limitations apply.
Shin Chuan Computer User’s Manual SC800/SC820 Note: If you are working offline, messages that have been deleted from the device the next time you connect. Empty the Deleted (local) folder: ¾ Select File> Empty Deleted (local). This permanently deletes messages in the Deleted (local) folder. ¾ To check or adjust the current settings for deleting messages, select 9 Services> Options> Delete tab.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ able to read and respond to messages in that folder only when connected to the server. To designate a folder as offline, select the folder and then select Service > Offline Folder. ¾ ¾ ¾ Rename a folder: Select the folder you want to rename. Select File> Folder> Rename Folder. Type the new name for the folder. Notes: z z Default folders, such as Inbox, can’t be renamed. Folders you create for IMAP4 mail servers can’t be renamed.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ ¾ e-mail address through Choose E-mail Recipients. To attach a file, select File> attachments> Add Attachment. Select File> Send. If you are working offline, the message is moved to the Outbox folder and will be sent the next time you connect. Tip: to see more header information, select the triangle in the lower-right corner of the header area. Select the triangle again to collapse the header area.
Shin Chuan Computer User’s Manual SC800/SC820 mail service. If you are already connected through a remote connection other than the one you specified in the service, you will be asked if you want to use the current connection. If you choose not to, you will need to disconnect from the current connection before you can check for new messages. ¾ Select the Services menu and make sure that the service you want to use is selected (the selected service has a bullet next to it.) ¾ Select Services> Connect.
Shin Chuan Computer User’s Manual SC800/SC820 dropping it. Also, be sure to set your IMAP4 service to receive full copies of messages, attachments, and meeting requests. For more information on using Journal, see the Help for the desktop version of Outlook. 9 Working with Message Attachments: ¾ If you receive messages through a remote mail server, in Inbox on the device, select the Get file attachments and meeting requests (IMAP4) or Get meeting requests (POP3) setting in the Inbox Preferences dialog box.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ If you use more than one storage card, select it from the list. Note: Once you make the above selection, all attachments will be moved to the selected card. 9 Delete an attachment: To delete an attachment from a message you are sending, select the ¾ ¾ 9 attachment, and then select Edit> Clear or press the DEL key on the keypad. To delete an attachment you have received, delete the message.
Shin Chuan Computer User’s Manual SC800/SC820 5.2.2 Internet Explorer With Internet Explorer, you can view Web or intranet Web pages on your device. You will need to use a modem or WLAN to connect to an Internet server provider (ISP) or network. 5.2.2.1 Connect to the Internet Before you can view Web pages, you must set up a remote connection to your ISP or network. 5.2.2.2 Start Internet Explorer 9 Open Internet Explorer by selecting Start > Programs > Internet 9 9 9 9 Explorer.
Shin Chuan Computer User’s Manual SC800/SC820 and drag the sliding menus to the left or right to see the hidden menu items and toolbars. To achieve more screen real estate in Internet Explorer, you can hide the Status bar and View menu. From the top menu bar, go to View > Hide Toolbars. Once it is hidden, you must cold reset to access these features again. Refer to 2.7.2 “Cold Reset “for more information. 5.2.2.
Shin Chuan Computer User’s Manual SC800/SC820 5.2.2.9 Add and view Favorites 9 Go to the page you want add 9 9 9 9 Select Favorites > Add To Favorites. If necessary, locate the folder you want. Confirm or change the name. To view your favorite Web sites, select Favorites and the Web site you want to view. Note:To organize your Favorites list, select Favorites > Organize Favorites. 5.2.2.
Shin Chuan Computer User’s Manual SC800/SC820 from the Internet or Intranet without using cached memory. 9 9 Select File > Save As Specify a folder location and give the file name. 5.2.2.17 Copy a Web page to a document 9 Select all or part of the Web page you want to copy. 9 Select Edit > Copy. Go to the document where you want to place the information and select the location. 9 Select Edit > Paste. 9 5.2.2.
Shin Chuan Computer User’s Manual SC800/SC820 buttons and menu commands that are similar to those used in the desktop version of Microsoft Word. You can work with files Normal or Outline view. WordPad documents are usually saved as .pwd files, but you can also save documents in other file formats, such as .rtf or .doc. 5.2.4.1 Selecting and Editing Text 9 Select text 9 To select Do this Any amount of text Drag the stylus over the text. A word Double-tap the word.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ the Copy button. To paste the information, move the insertion point to the desired location, and select the Paste button. Notes: z z To undo an action, select Edit > Undo. To restore the action, select Edit > Redo. 5.2.4.2 Formatting Text 9 Create bulleted and numbered lists ¾ Select the Bullets or Numbering button. Type the first item. ¾ ¾ ¾ Press ENTER, type the next item, and repeat as needed. Select the button again to end list formatting.
Shin Chuan Computer User’s Manual SC800/SC820 9 ¾ Adjust the paragraph alignment Select the paragraph you want to align. Select the Align Left, Center, or Align Right button. Note: To see more formatting options, select Format > Paragraph. ¾ 9 ¾ ¾ ¾ 9 ¾ ¾ Indent a paragraph Select the paragraph you want to indent. Select Format > paragraph. Adjust the indentation settings as needed. Set tabs Select Format > Tabs. Change the tab settings as needed. 5.2.4.
Shin Chuan Computer User’s Manual SC800/SC820 5.2.4.5 Inserting Symbols 9 Place the insertion point where you want to insert the symbol. 9 9 Select Tools > Insert Symbols. Select the symbol you want, and then select Insert. Tips: If you select a different font ( or subset of a font), a different set of Symbols will be displayed. 5.2.4.6 Printing a Document 9 Select File > Print. Select the printing options you want.
Shin Chuan Computer User’s Manual SC800/SC820 9 ¾ Changes caused by Word document conversion Formatting z Borders and Shading Borders and shading are not displayed in WordPad, but are restored when converted back to a Word document. Shading is not restored when used in a table, but simple borders are restored. z Character formatting Bold, italic, strikethrough, superscript, subscript, and hidden text are retained and displayed. Other effects are changed or removed.
Shin Chuan Computer User’s Manual SC800/SC820 ¾ OLE Objects OLE Objects are removed during conversion. ¾ Revisions marks, annotations, and comments Revision marks are visible but cannot be changed. Annotations and documents are removed during conversion. 5.2.5 Remote Connection Using Remote Desktop Connection, you can log on to Windows Terminal Server and use all programs installed on this server. For example, instead of running Microsoft Pocket Word, you can run the desktop version of Microsoft Word.
Shin Chuan Computer User’s Manual SC800/SC820 5.2.5.2 Disconnecting Without Ending a Session 9 In the Remote Connection window, select Start > Shutdown. 9 Select Disconnect > OK. Note: If you previously disconnected from a Terminal Server without ending the session, the Terminal Server will continue to execute any running processes and Remote Connection can later reconnect to this same session(if your administrator has configured Remote Connection to reconnect to disconnected sessions). 5.2.5.
Shin Chuan Computer User’s Manual SC800/SC820 9 Use the Go menu ¾ To quickly access the My Documents folder, select Go > My ¾ Documents To see all of the folders you have accessed, select Go > History. Double-tap a folder to return to it. 5.2.6.2 Viewing Files as Icons Lists 9 To view icons, select View > Large Icons or Small Icons. 9 To view a list, select View > Details. 5.2.6.3 Working with Files and Folders 9 Create a new folder If necessary, open the folder where you want the new folder to reside.
Shin Chuan Computer User’s Manual SC800/SC820 5.3 DiskOnChip The DiskOnChip let the application or a data file can be stored into the Flash Memory. Note: The DiskOnChip storage memory persists all reset (warm/cold reboot) conditions and software/firmware updates. We strongly recommends installing all applications, applets, programs, and important data files to the DiskOnChip Flash location.
Shin Chuan Computer User’s Manual SC800/SC820 5.3.3 DiskOnChip Size The size of the DiskOnChip will vary, depending on the size of system firmware. Inside the DiskOnChip directory, tap File > Properties. 9 The DiskOnChip Properties dialog: The number following Free is the amount of memory currently available on your device.
Shin Chuan Computer User’s Manual SC800/SC820 Appendix A GPRS Function A.1 Using the GPRS Features Use the PDT to make and receive data and send. Your service provider may provide other useful services such as GPRS. The PDT can also be used to connect to an Internet Service Provider (ISP) or work network so you can browse the Web and read e-mail. You can connect to the Internet or work network via GPRS (General Packet Radio Service). A.1.
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-2 Remove SIM Card from SIM Tray Note: Repeat the same steps to remove the SIM card from the SIM tray. A.1.3 Before Start: Warning! 1. Before start to using GPRS, you must wait the GPRS icon in the task bar to appear. 2. If you using GPRS before power off or suspend device, you must launch the AP again on next power-on the device. Procedures: 1. Double Tap icon to Launch GPRS program. 2. If you have setting the PIN code, you might input the PIN code.
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-5 Enable GPRS Module Process Figure A-6 Dial-up to GPRS? Figure A-7 GPRS Connecting-Please Figure A-8 GPRS Connected wait A-3
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-9 Launch PIN CODE Figure A-10 PIN Code Input GPRS Module Active Symbol: GPRS Module is Disable (Power off) GPRS Module is Enable (Power on) A.2 Select settings Click the button to selecting the setting for your want: Set GPRS Connection: The default COM Port of GPRS Module is COM 8. (Figure A-14). to create or to modify the internet connections.
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-11 Set GPRS Connection Figure A-12 Set GPRS Connection Figure A-13 GPRS Properties Figure A-14 GPRS Connection Properties A-5
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-15 Configure-Port Settings Figure A-16 Configure-Call Options Figure A-17 TCP/IP Settings-General Figure A-18 TCP/IP Settings-Name Servers A-6
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-19 Set GPRS Connection- Figure A-20 Set GPRS Connection- Security Settings Bluetooth Figure A-21 Set GPRS Connection-Phone Number A-7
Shin Chuan Computer User’s Manual SC800/SC820 A.3 Internet connection Warning! On the equipment, the fact of connecting to the Internet Explorer. Configuring the network operator The AP preserves one standard setting; other establishment, please consult your mobile phone service provider define and not by oneself manual to set up. This setting will produced an ‘GPRS Connection’ in the “Network and Dial-up Connections” Figure A-22 GPRS Connection Icon A.3.
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-23 GPRS Connection Figure A-24 GPRS Connection Properties Figure A-25 GPRS Connecting Figure A-26 GPRS Connecting A-9
Shin Chuan Computer User’s Manual SC800/SC820 Figure A-27 GPRS Connecting Figure A-28 GPRS Connecting Figure A-29 GPRS Connected A-10
Shin Chuan Computer User’s Manual SC800/SC820 Suspend / Resume The GPRS module can not connection automatically, while the device entry Suspended and Resumed. You shall re-connect manually.
Shin Chuan Computer User’s Manual SC800/SC820 Appendix B Expansion Module Applicability B.1 RFID Applicability B.1.1 Read Mode Sub Item Description OPEN Enable the RFID device.
Shin Chuan Computer User’s Manual SC800/SC820 Figure B-1 RFID Power On Figure B-2 Continue Mode-Start Figure B-3 RFID Power On Figure B-4 WriteMode B.1.2 Write Mode Sub Item Tag Type (TI, AMIC, Philips) Explaining Choose the tag card type before writing.
Shin Chuan Computer User’s Manual SC800/SC820 Write 2 bits AFI (Application Family Identifier) code to tag card. Write 2 bits DSFID (Data Storage Format Identifier) code to tag card. Lock AFI code of tag card, the AFI code of tag card will be not writing after lock. Lock DSFID code of tag card, the DSFID code of tag card will be not writing after lock. Write 8 bits data to someone block of tag card storage memory.
Shin Chuan Computer User’s Manual SC800/SC820 Log File Save log file “gpslog.txt” to “My Computer” folder. Viewing Area Show the state data of GPS.
Shin Chuan Computer User’s Manual SC800/SC820 B.2.
Shin Chuan Computer User’s Manual SC800/SC820 Appendix C 2D Barcode Scanner Setting C.1 Basic Tab Tab □ Icon to Enable or Disable bar code reader C.
Shin Chuan Computer User’s Manual SC800/SC820 C.
Shin Chuan Computer User’s Manual SC800/SC820 C.4 Quiet Zone Tab C.
Shin Chuan Computer User’s Manual SC800/SC820 C.6 ASCII Conversion Tab C.
Shin Chuan Computer User’s Manual SC800/SC820 C.
