User's Manual

3-33
3.2.7 Dialing Properties
Table 3-28 Dialing properties
ICON ITEM & FUNCTION
l “Dialing Properties” Tab :( Figure 3-44)
ü In the When dialing from list, select the “Location” where you
want to change settings.(Figure 3-45)
ü To create a new location, select “New”. Enter the name of the
location, and then select “OK”.(Figure 3-46)
ü Enter or edit the area code and local country code as needed.
ü In Dial using, select “Tone dialing” or “Pulse dialing”. Most
phone lines are tone.
ü To automatically disable call waiting, select “
□
Disable call
waiting by dialing”, select the appropriate number sequence in
the list, or enter a new sequence.
l Editing dialing patterns (Figure 3-47)
ü Using the codes listed in the topic; revise the dialing patterns as
needed.
Notes:
n If you need to use character other than the ones listed here,
use manual dialing.
n Hyphens and spaces in dialing strings are ignored.
n Some modems may not respond to the following characters,
even though your device lets you add them to the dial
string.