User's Manual

2-37
802.11b WLAN signal is Low.
802.11b WLAN signal is In General.
802.11b WLAN signal is Good.
Figure 2-22 WLAN Manager Figure 2-23 WLAN Manager
2.5.7 Reading barcodes, 1D laser version.
To use the scanning function, complete the following steps:
1. If you have not already done so, remove the protective plastic film before using
devices equipped with a 1D laser bar code reader.
2. Select Start > Setting > Control Panel > Barcode Setting; complete all
configurations following all description of 3.2.1 BarCode Setting.
3. Run the WordPad software program.
4. Press one of the three barcode reader trigger buttons.
5. Aim the scanning beam at the center of barcode.