User's Manual

A-25
Template symbol. Scan the d from the OCR Programming Chart in the back of this
manual eight times, then scan the t to create the “or” statement. Then you would scan
the characters for the second template. Scan d four times, scan l two times, then scan
d two more times. Scan Save OCR Template. This would let you read either type of
format, for example:
You can string together as many templates as you need.
OCR Template Codes
Note: Reading more than three rows of OCR is not recommended. Contact the factory
if you have an application that requires reading four or more rows of OCR.
† One or more two-digit numbers and Save are required after reading this
programming symbol. Refer to the Programming Chart on the inside the back cover of
this manual.
Exit Selections