User's Manual

A-5
Item Function Explaining
Prefix
Type the desired label prefix in this text box
Label
Suffix
Type the desired label suffix in this text box
A.2. Update Tab
Function Explaining:
Item Function Explaining
Firmware
Revision
When this item is selected, the imager is queried for the
current firmware version information. The version information
is then displayed in the text window.
Flash New
Firmware
This item allows new engine firmware to be installed into the
imager. When Flash New Firmware is selected; you are
prompted to select the firmware file. The file, which must have
the extension ".bin", must reside on the PDT. The firmware
file can be copied to the PDT using Microsoft Explorer as long
as the PDT is linked to the PC via Microsoft's Active Sync.
The default search location is the My Documents folder. Once
you select a file, the file is transferred to the engine. The
engine then writes the new firmware into flash memory and
re-initializes. The flashing of the firmware and subsequent
restart takes approximately 30 seconds. The application insures