User's Manual

3-53
Figure 3-86 Stylus Properties Figure 3-87 Stylus Properties
3.2.21 System
Table 3-43 System
ICON ITEM & FUNCTION
l “General” Tab : (Figure 3-90)
ü To show:
Ø Firmware information
Ø Information about Processor type, Memory size, Expansion
card
l “Memory”: (Figure 3-91)
ü Move the slider to adjust memory allocation. Default storage
memory is normally is normally set to about 8MB with the
reminder assigned to Program memory.
ü Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM size in
Information properties and total memory size of storage memory
and program memory
l “Device Name” Tab : (Figure 3-92)