User Manual

5-1
Chapter 5. Software Applications
5.1 Introduction
The PDT includes Calculator, Inbox,…..
You can switch to any software program by tapping the Start Menu.
5.2 Software Applications
5.2.1 Calculator
It can process the basic numeric calculation with “+”, “-“ “*” and “/“.
 Procedure:
 Tap numeric number
 Tap one operator “+”, “-“, “*” or “/”
 Then, tap another numeric number
 Tap another operator or numeric number if needed
 Tap “=” to get result
 Button Function:
 “MC” – Clear memory
 “MS” – Store the displayed numeric number to memory
 “MR” – Read the newest stored numeric number
 “M+” – Add stored numeric number into the displayed numeric number.
 “Backspace” – Same as “ backspace” key
 “CE” – Clear current keying numeric number. Same as “ Delete” key
 “C” – Clear the current calculation. Same as “ESC” key.
5.2.2 Inbox
Use Inbox to send and receive e-mail messages in the following ways:
 Synchronize e-mail messages with Microsoft Exchange or Outlook on the
Host Computer.
 Send and receive e-mail messages by connecting directly to an e-mail server
through an Internet server provider (ISP) or a network.