User's Manual

A-7
A.3.2 Codabar
Function Explaining:
Item Explaining
Symbol Enable Enable this barcode
Check Char/Digit Enable The scanner reads barcode data with a
check digit. If not checked, the bar code
will be read as though no check digit
was present.
Check Char/Digit Transmit The scanner will only read Codabar bar
codes printed with a check digit, and
will transmit this character at the end of
the scanned data. This setting is only
valid if check char/digit is enabled.
Start/Stop Transmit
Start/Stop characters identify the leading
and trailing ends of the barcode.
Message Length The minimum and maximum length
ranges for the barcode are 2-60.