User's Manual

B-26
containig all parameters for use over "high speed" networks, such as GPRS. In
order to avoid overwriting a pre-programmed configuration on your mobile,
select a free storage profile using its context ID.
6. If your network operator is recognized by the application, the
Use standard
settings box is checked by default. Uncheck it if you want to specify the settings
manually and click Next :
- Specify the APN or number, Name and Password settings as required. Click
Next and repeat for subsequent screens for IP address, DNS and QOS.
7. Click Next. The following dialog box enables a backup configuration to be
created for your high-speed connection to be applied if it is unsuccessful. If you
request a backup configuration to be created, the application will display the
entry screens shown previously for "standard" connection.
Changing an access configuration
1. Access the connections list.
2. Click the connection to be changed or display the context menu by holding the
stylus on the connection to be changed and select the Modify option.
3. Follow the Creating access configurations steps.
Deleting
1. Access the connections list.
2. Display the context menu by holding the stylus on the connection to be changed
and select the Delete option.
Connecting
You can set up or access the connection from the main interface, from the Tools >
Internet connection menu or by clicking on .
● You will be shown a list if more than one access is configured.
● If no access has been configured, the application will prompt you to access the
Setup program to create one.