User Manual

1
-
1
Chapter 1. Introduction
Congratulations on purchasing the SC600 Portable Data Terminal (PDT), a Microsoft
Windows® CE .Net rugged PDT. Its special combination of features makes it perfect for
using in a wide range of applications. These features as:
λ Intel® XScale
TM
PXA255 400MHz 32 bits RISC Processor
λ Windows® CE .NET 4.2 Operating System
λ 64/128/256 MB SDRAM & 64/128 MB Flash ROM
λ Open Architecture: User Accessible SD/CF/PCMCIA Slot
λ 240 x 320, 3.5” Color TFT Display with Touch Panel
λ 1 Numeric Keyboards with LED backlight
λ 802.11b Radio Support (Bluetooth Optional)
λ Optionally Built-in GSM/GPRS Module
λ Integrated 1D or 2D Barcode Scanner
1.1 About this Manual
The following chapters contained in this manual are:
Chapter 1: Introduction --- Present the general information about the PDT.
Chapter 2: Getting started --- Describe the basic use of the PDT.
Chapter 3: Setting – Provide basic instructions for customizing the PDT by adjusting
settings.
Chapter 4: Communication --- Describe how to use all kinds of communication of the
PDT.
Chapter 5: Software Application --- Offer the procedures of Software implement.
1.2 User and Product Safety
◆ Do not stare into the laser beam directly or shine it into eyes.
◆ Never use strong pressure onto the screen or subject it to severe impact, as the LCD
panel could become cracked and possibility cause personal injury. If the LCD panel
is broken, never touch the liquid inside, for such contact would irritate the skin.
◆ Although the SC600 PDT has been passed the test of IP54 standard for water and
dust resistance, avoid prolonged exposure to rain or other concentrated moisture.
For these conditions exceed the IP54 standard, and could result in water or other