User Manual

7. Upon reading a bar code, the red LED indicator comes on until the trigger is

release or five seconds. The green LED and the beep tone indicate a good read.

8. Barcode Scanning Position

This device can read from 40 to 300mm distance.

1) Position the laser scanner close to the barcode when scanning small

barcodes. And position it in a distance from the barcode when scanning

large barcodes

2) The reader can be detected by a red beam.

9. Bad Scanning Position

1) Make sure that the bars enter the laser beam when scanning large

barcodes.

2) Scanning operations may fail if the laser beam positions as below.

Note: this product scans using laser light. Never look directly into the laser light

or shine the laser light into the eyes.

2.5.8 Help

To tap “?” can get help information for each program.