User Manual

2
-
25
802.11b WLAN signal is Low.
802.11b WLAN signal is In General.
802.11b WLAN signal is Good.
Figure 2-18 WLAN Manager Figure 2-19 WLAN Manager
2.5.7 Scanning Barcode
To use the scanning function, complete the following steps:
1. If you have not already done so, remove the protective plastic film before using
devices equipped with a laser scanner.
3. Select Start > Setting > Control Panel > Barcode Setting; complete all
configurations following all description of 3.2.1 BarCode Setting.
4. Run the WordPad software program
5. Aim the scanning beam at the center of bar code.
Ø Position the device close to bar code when scanning
Ø Position at a distance when scanning lager bar codes.
Ø The scanner is disabled after you release the key or after five seconds.
6. Press the Right/left/central scan key. The scanner scans as long as you hold the
key or for five seconds.