Specifications

44
2. Align with the hole in the stud, and then press-fit the lever stud.
* The correct direction for the lever stud is when the E-ring groove is
at the top.
* Check that the surface of the bracket unit and the top end of the
lever stud are flush with each other so that the E-ring will fit into the
groove.
3. Use part A of the special tool to install
the E-ring.
* Operate the shifting switches (X and Y) and check
that they turn on, and check that the lever
operates smoothly.
 Replacement of the pulley
2mm Allen key
Guide pulley / tension pulley
tightening torque:
2.5 - 5 N·m {22 - 44 in. lbs.}