Specifications

42
Switch unit fixing screws
(#T5 TORX®)
TORX is a registered trademark of Camcar LLC.
4. Remove the two switch unit fixing screws, and then remove the switches and the
switch springs. The bracket unit and the lever unit can then be disassembled.
Switch springs
DURA-ACE Grease
(Y-04110000)
Apply grease
 Assembly of the switch unit
1. Check that the buttons are attached to the springs, and then place the switch
springs into the holes in the switch unit setting plate.
2. Place the switch unit against the mounting surface of the switch unit setting plate.