Specifications

34
Installation of the battery mount
1. Set the electric wire for the battery mount into the groove in the electric wire cover for the battery mount.
2. Place the accessory spacers in between the battery mount and the frame and then secure them by tightening the bolts.
* If installing the bottle cage, it is easier to install it at this stage.
* Refer to the Service Instructions for the bottle cage for details on the tightening torques.
3. Use the accessory cable tie to secure the battery mount to the frame.
Cable tie
Spacers
1
2
3
2mm Allen key
Battery mount fixing bolt
(M4 x 15mm)
* If there is a mounting boss on the frame, the
battery mount can be secured to the frame with
a bolt.
Tightening torque:
1.2 - 1.5 N·m {10.4 - 13 in. lbs.}