Specifications

Once the electric wires have been routed, secure junction (B) underneath the bottom bracket shell.

Junction (B) fixing bolt

(10.5mm or 15mm)

(3mm Allen key)

Tightening torque:

1.5 - 2 N·m {13 - 18 in. lbs.}

Next, install the electric wire cover to the frame. In order to make sure that the

electric wire cover is securely installed, clean the frame with alcohol or some other

cleaning agent to remove any grease or other substances before installing the cover.

Place the electric wire cover over the electric wires, and then attach it to the frame.

Checking connections

After connecting the electric wires to all of the components, install the battery and check the

operation.

Operate the shifting switches and check that the front derailleur and rear derailleur both operate.

Note:

* If not installing the chain at this point, be sure to operate shifting switch (X) for the left lever

once or more to set the front derailleur to the larger chainring position when installing the

chain. After this, be sure to remove the battery.

Shifting switch (X)