Specifications

26
3.
Use the accessory cable ties to secure junction (A) to the outer
casing of the brake cable.
 Installation of the battery mount
1. Set the battery mount into position. Use the bottle cage fixing bolt to provisionally install the battery mount to the bottom of
the bottle cage.
Use the bolts which are included with the bottle cage to secure
the SM-BMR1-L/ SM-BMR2-L (long type).
Refer to the Service Instructions for the bottle cage for details
on the tightening torques.
Tightening torque:
1.2 - 1.5 N·m {10.4 - 13 in. lbs.}
Use the included M4 bolts to secure the SM-BMR1-S/
SM-BMR2-S (short type).
108 mm
2. Leave a space of 108 mm or more at the end of the battery
mount. Check that the battery can be inserted and removed
while the bottle cage is installed.
Tightening torque:
1.2 - 1.5 N·m {10.4 - 13 in. lbs.}