Specifications

23
4. Use a 2 mm Allen key to turn the support bolt in order to adjust the
position of the front derailleur so that the flat part of the chain guide
outer plate is directly above and parallel to the large chainring.
 Installation of the rear derailleur
When installing the rear derailleur, make sure that the B-tension adjustment bolt does not
touch the dropout tab and cause it to bend.
B-tension adjustment bolt
5mm Allen key
Pulley cage
Dropout tab
Bracket tightening torque:
8 - 10 N·m {70 - 86 in. lbs.}
 Installation of the chain
Note:
* This 10-speed chain for road riding has a differently-shaped forward side and reverse side in order to improve high gear
shifting performance.
Forward (outer side) Reverse (inner side)
The side with the marks shown in the illustration is the forward side (outer side).
Chain length
Smallest sprocket Larger chainring
Tension pulley
Guide pulley
Chain
90º
+
Chain
+ 2 links
* If the largest sprocket is 28T or more
Add 2 links while the chain is on the larger chainring and the
largest sprocket.
Largest sprocket Larger chainring