Specifications

21
The lever stroke can be smoothly adjusted using the bolt on the top of the bracket unit. Check the lever operation while adjusting.
 Installation of the front derailleur
1. Install the front derailleur to the frame.
When installing a brazed-on type
If installing the front derailleur to a brazed-on type frame, a protector must be attached to the seat tube. Always be sure to
install the protector in order to prevent damage to the frame from the pressure applied by the support bolt of the front
derailleur.
Installation of the protector
Check the position where the support bolt directly touches the frame when the support bolt of the front derailleur is being
adjusted, and attach the protector in that position. In addition, avoid positioning the duct tape that attaches the protector to
the seat tube in the location where the support bolt directly touches the frame.
Support bolt
* Protectors with a curved adhesion surface and a flat adhesion surface exist as shown
in the illustration, so use whichever type matches the shape of the frame.
Duct tape