Instruction manual

1. Introduction
Safety Precautions
To ensure that you use the balance safely and correctly, read the following precautions carefully and
observe them.
WARNING
Prohibitions
Never disassemble, modify or attempt to repair this product or any
accessory.
You could sustain an electric shock or the product could operate abnormally.
If you believe that the balance has failed, contact your Shimadzu representative.
Instructions
Use the balance with the specified power supply and voltage.
Using the printer with an incorrect power supply or voltage will lead to fire or trouble
with the printer.
Note also that if the power supply or voltage is unstable or if the power supply
capacity is insufficient, it will not be possible to obtain satisfactory performance
from the printer.
Prohibitions
Do not use the balance outdoors or anywhere where it will be exposed
to water.
You could sustain an electric shock or the product could operate abnormally.
The levels of danger and damage that will arise if the balance is used incorrectly are classified
and indicated as shown below.
WARNING
Indicates a potentially
hazardous situation which,
if not avoided, could result in
serious injury or possibly
death.
CAUTION
Indicates a potentially
hazardous situation which,
if not avoided, may result in
minor to moderate injury or
equipment damage.
Precautions are classified and explained by using one of the symbols below, depending on the
nature of the precaution.
Instructions
Indicates an action that must
be performed.
Prohibitions
Indicates an action that must
NOT be performed.
To be strictly observed
3